IMR7Z4B2075 Apem

IM series Sealed snap-action pushbutton switches bushing 12 mm momentary DISTINCTIVE FEATURES Snap-action : tactile feedback with audible click High current/voltage rating Sealed to IP67 Flat round actuator for optional marking NO+NC ENVIRONMENTAL SPECIFICATIONS Front panel sealing : IP67 according to IEC 60529 Shock resistance : 50 g - 11 ms according to IEC 68-2-27 Salt spray : IEC 512-6, test 11f Operating temperature : -40 C to +85 C (-40 F to +185 F) Storage temperature : -40 C to +85 C (-40 F to +185 F) ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : 3 A 28 VDC Initial contact resistance : 100 m max. Insulation resistance : 1 G min. at 500 VDC Dielectric strength : 500 Vrms between terminals Electrical life at full load : 25,000 cycles GENERAL SPECIFICATIONS Panel thickness : 1.5 mm (.059) to 10 mm (.394) Total travel : 1.7 mm (.067) 0.3 mm Low level or mechanical life : 1,000,000 cycles Torque (applied to nut) : 1 Nm max. with metal nut U166 1.5 Nm max. with plastic nut U4248 MATERIALS Case : polyamide 4/6 Actuator : polyamide 6/6 Bushing/bezel : polyamide 6/6 Contacts : silver, gold plated Terminal seal : epoxy The company reserves the right to change specifications without notice. 1 B1 SW-IM-1709 PANEL SWITCHES2 2 IM series Sealed snap-action pushbutton switches bushing 12 mm momentary MOUNTING STANDARD BEZEL (CONTINUED) AGENCY APPROVAL 1 A 125 VAC/250 VAC BACK OF PANEL SPACE REQUIREMENT File E83438 20.00 20.00 (.787) (.787) 12.90 (.507) Availability : consult factory for details of approved models. Marking : to order switches marked UL, complete 1 appropriate box of ordering format. 13.60 (.535DIA) 13.50 (.531DIA) TERMINALS CIMPE MOUNTING REDUCED BEZEL 1.00 1.00 CIMPE (.039) (.039) 1.20 1.20 (.047) (.047) PANEL CUT-OUT 2.80 2.80 17.50 17.50 ECH1 (.110) (.110) (.689) (.689) 12.90 (.507) le 28/03/2012 Straight P Quick-connect Z CIMCPCIMCP CIMCZCIMCZ 2 13.60 (.535DIA) ELECTRICAL FUNCTIONS 13.50 15.60 (.531DIA) (.614DIA) - Flat seal CIMPE2 MATRIX MOUNTING CIMC CIMC 15.00 15.00 Function 7 (NC+NO) (.590DIA) (.590DIA) 17.50 17.50 ECH1 ECH1 (.689) (.689) 12.90 (.507) le 28/03/2012le 28/03/2012 CIMFCT 1 2 3 2 CIMPE2 ECH1 le 29/03/2012 13.60 (.535DIA) MOUNTING STANDARD BEZEL 13.50 15.60 (.531DIA) CIMFCT (.614DIA) Echelle 0.9 CIM075234 PANEL CUT-OUT 20.00 20.00 20.00 20.00 075 234 (.787) (.787)(.787) (.787) - O-ring 12.90 12.90 (.507) (.507) CIMPE2 BACK OF PANEL SPACE REQUIREMENT 1 1 17.50 17.50 (.689) (.689) 12.90 13.6013.60 (.507) (.535DIA(.535DIA) ) 13.5013.50 CIMPE2 2 (.531DIA(.531DIA) ) ECH1 le 29/03/2012 - Flat seal 13.60 (.535DIA) CIMPECIMPE 13.50 15.60 MATRIX MOUNTING (.531DIA) (.614DIA) CIM075234 20.00 20.00 (.787) (.787) 12.90 (.507) CIMPECIMPE Ech 0.9 CIMPE2 1 ECH1ECH1 le 28/03/2012le 28/03/2012 LE 28/03/2012 13.60 (.535DIA) 13.50 (.531DIA) 2 CIMPE2 B1 ECH1 le 29/03/2012 CIMPE CIMPE ECH1 le 28/03/2012 1.50min-10.00Max (.059MIN.-.393MAX.) 3.70 (.146) PANEL SWITCHES 20.00 3.70 (.787) (.146) 3.50 (.138) 3.50 (.138) 0.80min-4.30Max (.031MIN.-.169MAX.) 1.50min-10.00Max (.059MIN.-.393MAX.) 1.50min-10.00Max (.059MIN.-.393MAX.) 17.50 7.60 (.689) (.299) 20.00 (.787) 20 (.787) 1.50min-10.00Max 7.60 (.059MIN.-.393MAX.) (.299) 1.50min-10.00Max 2.40 (.059MIN.-.393MAX.) (.094) 2.40 20.00 (.094) 0.80min-4.30Max (.787) (.031MIN.-.169MAX.) 20.00 (.787) 1.50min-10.00Max (.059MIN.-.393MAX.) 5.00 20 (.196) 17.50 (.787) 20 (.689) (.787) 20 (.787) 20 (.787) 5.00 (.196) 20 (.787) 0.80min-4.30Max (.031MIN.-.169MAX.) 1.50min-10.00Max (.059MIN.-.393MAX.) 17.50 (.689) 20 (.787)