IP series Pushbutton switches for harsh environments bushing 12 mm latching DISTINCTIVE FEATURES Latching action Illuminated or non-illuminated Compact Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS Front panel sealing : IP67 according to IEC 60529 Shock resistance : 100 g according to IEC 512-4, test 6c Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d Salt spray : IEC 512-6, test 11f Robustness (non-illuminated) : IK06 according to EN 62262 (1 joule) Operating temperature : -40 C to +85 C (-40 F to +185 F) ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load: 4 A 12 VDC, 200,000 cycles 1 A 48 VDC, 200,000 cycles For W terminals, current has 2 A 48 VDC, 100,000 cycles to be limited to 400 mA. 3 A 48 VDC, 75,000 cycles 1 A 72 VDC, 15,000 cycles Initial contact resistance : 100 m max. Insulation resistance : 1 G min. at 500 VDC Dielectric strength : 1,500 Vrms between terminals 1,000 Vrms between terminals and frame LED COMPONENT SPECIFICATIONS LED color Forward current Typ. forward voltage Max. forward voltage Super red (L0S) 20 mA 1.95 V 1.95 V A resistor must be series-connected by the user. Yellow (L0Y) 20 mA 2 V 2.05 V Resistor value = supply voltage - LED forward voltage Green (L0G) 20 mA 2.1 V 2.5 V LED forward current Blue (L0B) 20 mA 3.2 V 4 V The company reserves the right to change specifications without notice. 1 SW-IPLATCH-1802 PANEL SWITCHESIP series Pushbutton switches for harsh environments bushing 12 mm latching GENERAL SPECIFICATIONS TERMINALS Panel thickness : 1.5 mm (.059) min. 5.5 mm (.217) max. 1.40 Total travel : 2.5 mm (.098) 0.3 mm (.055) 1.20 1.00 (.047) Typical operating force : 10 N (.039) 2.80 2.80 (.110) (.110) Low level/mech. life : 200.000 cycles Straight P Quick-connect Z1 Solder lug S Torque : 1.5 Nm max. applied to nut Soldering : 320 C (608 F) max. for 3 sec. CISCOSP ECH: 0.9 5-05-03 ELECTRICAL FUNCTION CIPNLF1COS CISCOSZ-A DESSIN ECH 0.9 DESSIN ECH 0.9 MATERIALS 5-05-03 17.10.01 Case : thermoplastic, UL 94-V0 Actuator : polyamide 6/6 Bushing/bezel : zinc die-cast (zamak), black painted Contacts : silver, gold plated OFF ON Output wires (flying lead terminals) : 2 F version : AWG20, section 0.6 mm 2 W version : AWG24, section 0.23 mm LED wires : MOUNTING 2 F version : AWG26, section 0.12 mm 2 W version : AWG24, section 0.23 mm PANEL CUT-OUT Lens : polycarbonate 12.90 (.507) Terminal seal : epoxy APEM products may be recycled at end-of-life for the re-claiming of valuable 1 metal components. 13.60 (.535DIA) 13.50 (.531DIA) - Flat seal AGENCY APPROVAL 2 A 125 VAC/250 VAC File E83438 MATRIX MOUNTING - BACK OF PANEL SPACE REQUIREMENT See following pages. 20.00 20.00 CIPDTF1EP (.787) (.787) ECH1 CIPDTF1SFCT 18.10.01 22.10.01 DESSIN ECH 0.9 CIPDTF1EA 2 DESSIN ECH 1 17.10.01 PANEL SWITCHES 20.00 (.787) 3.40 (.133) 2.40 (.094) 8.40 (.330) 19.10 (.751) 2.30 (.090) 1.50min-5.50Max (.059 min-.216max) 3.20 (.125)