IP series
Pushbutton switches for harsh environments
bushing 12 mm momentary
DISTINCTIVE FEATURES
Illuminated or non-illuminated
Tactile feedback
Wide variety of configurations
Flat round actuator for optional marking
Sealed to IP67 and IP69K
ENVIRONMENTAL SPECIFICATIONS
Front panel sealing: IP67 according to IEC 60529
IP69K according to DIN 40050-9 (non-illuminated) with cap U5125
Shock resistance: 100 g according to IEC 512-4, test 6c
Vibration resistance: 10-500Hz - 10 g according to IEC 512-4, test 6d
Salt spray: IEC 512-6, test 11f
Robustness (non-illuminated): IK06 according to EN 62262 (1 joule)
Operating temperature: -40 C to +85 C (-40 F to +185 F)
ELECTRICAL SPECIFICATIONS
Max. current/voltage rating with resistive load (gold plated silver
contacts):
5 A 28 VDC, 70,000 cycles (only function 3)
For W terminals, current has
0.2 A 48 VDC, 500,000 cycles
to be limited to 400 mA.
0.5 A 48 VAC, 500,000 cycles
Initial contact resistance: 100 m max.
Insulation resistance: 1 G min. at 500 VDC
Dielectric strength: 1,500 Vrms
Contact bounce: 10 ms
LED COMPONENT SPECIFICATIONS
LED color Forward current Typ. forward voltage Max. forward voltage
Super red (L0S) 20 mA 2.1 V 2.3 V
Yellow (L0Y) 20 mA 2.1 V 2.3 V
A resistor must be series-connected by the user.
Green (L0G) 20 mA 2.1 V 2.3 V
Resistor value = supply voltage - LED forward voltage
Blue (L0B) 20 mA 3.2 V 3.8 V
LED forward current
White (L0W) 20 mA 3.35 V 4.25 V
Red/green (LSG) 20 mA Red: 1.95 V / green: 2.1 V 2.5 V
Yellow/green (LYG) 20 mA Yellow: 2 V / green: 2.1 V 2.5 V
The company reserves the right to change specifications without notice.
1
SW-IPMOM-1911
PANEL SWITCHESIP series
Pushbutton switches for harsh environments
bushing 12 mm momentary
GENERAL SPECIFICATIONS TERMINALS
Panel thickness: 1.5 mm (.059) min.
ILLUMINATED MODELS
4 mm (.157 max.)
Total travel:
LED
Cathode LED
Function 3: 1.7 mm (.067) 0.3 mm (0.012) (-)
Cathode
(-)
Function 5: 1.3 mm (.051) 0.3 mm (0.012)
Solder lug S Straight P
Typical operating force: 4 N 2 N
Low level/mech. life: 1,000,000 cycles
Torque: 1.5 Nm max. applied to nut
NON-ILLUMINATED MODELS
Soldering: 320 C (608 F) max. for 3 sec.
1.00 1.00
1.20 1.20
(.039) (.039)
(.047) (.047)
2.80 2.80
(.110) (.110)
MATERIALS
Quick-connect Z1
Straight P
Case: thermoplastic UL94-V0
CIPCOSPCIPCOSP CIPCOSZ1CIPCOSZ1
Actuator: polyamide 6/6
ELECTRICAL FUNCTIONS
Bushing/bezel: zinc die-cast (zamak), black painted
Contacts: - silver, gold plated (std)
ILLUMINATED MODELS NON-ILLUMINATED MODELS
- brass, gold plated (for option 104)
Output wires (flying lead terminals):
2
F version: AWG20, section 0.6 mm
2
W version: AWG24, section 0.23 mm
LED wires:
2
F version: AWG26, section 0.12 mm
2
Function 3 (NO) Function 3 (NO) Function 5 (NC/NO)
W version: AWG24, section 0.23 mm
Lens: polycarbonate
Terminal seal: epoxy
MOUNTING
PANEL CUT-OUT
12.90
(.507)
1
AGENCY APPROVAL
2 A 125 VAC/250 VAC
13.60
File E83438
(.535DIA)
13.50
See following pages.
(.531DIA)
MATRIX MOUNTING - BACK OF PANEL SPACE REQUIREMENT
20.00 20.00
(.787) (.787)
CIPCE1
2
PANEL SWITCHES
20.00
(.787)
5.20
(.204)
5.20
(.204)
4.55
(.179)
4.55
(.179)
8.70
(.342)
8.70
17.50
(.342)
(.688)
2.40
(.094)
2.40
1.50min-4Max
(.094)
(.059 min-.157max)