IR series Sealed pushbutton switches bushing 16 mm latching DISTINCTIVE FEATURES Latching action models Sealed to IP67 Illuminated or non-illuminated Flat round actuator for optional marking ENVIRONMENTAL SPECIFICATIONS Front panel sealing : IP67 according to IEC 60529 Shock resistance : 100 g according to IEC 512-4, test 6c Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d Salt spray : IEC 512-6, test 11f Operating temperature : -40 C to +85 C (-40 F to +185 F) ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load (gold plated contacts) : - Code 4 : 100 mA 24V DC, 200,000 cycles - Code 7 : 4 A 12 VDC, 200,000 cycles 1 A 48 VDC, 200,000 cycles 3 A 48 VDC, 75,000 cycles Initial contact resistance : 100 m max. Insulation resistance : 1 G min. at 500 VDC Dielectric strength : 1,500 Vrms between terminals LED COMPONENT SPECIFICATIONS LED color Forward current Typ. forward voltage Max. forward voltage A resistor must be series-connected by the user. Super red (0S) 20 mA 1.95 V 1.95 V Resistor value = supply voltage - LED forward voltage Yellow (0Y) 20 mA 2 V 2.05 V LED forward current Green (0G) 20 mA 2.1 V 2.5 V On flying lead versions, the LED resistor can be integrated by APEM on request. Blue (0B) 20 mA 3.2 V 4 V The company reserves the right to change specifications without notice. 1 SW-IRLATCH-1803 PANEL SWITCHESIR series Sealed pushbutton switches bushing 16 mm latching GENERAL SPECIFICATIONS TERMINALS Panel thickness : 8 mm (.314) max. Total travel : 2.5 mm (.098) 0.3 mm Typical operating force : 5 N 2 N 1.40 1.20 Low level or mechanical life : 200,000 cycles (.055) (.047) 1.10X0.50 (.043X.019) 2.80 Torque : 0.8 Nm max. applied to nut (.110) 2.80 (.110) Soldering : 320 C (608 F) max. for 3 sec. Solder lug S Straight P Quick-connect Z MATERIALS ELECTRICAL FUNCTIONS CISCOSZ-A Case : thermoplastic UL94-V0 CIPNLF1COS Plunger : polyamide DESSIN ECH 0.9 DESSIN ECH 0.9 ILLUMINATED MODELS Bushing/bezel : polyamide 5-05-03 17.10.01 Contacts : silver, gold plated (codes 4 and 7) 2 Multi-wire leads AWG20, section 0.6 mm 2 LED wire : AWG26, section 0.12 mm Lens : polycarbonate Terminal seal : epoxy OFF ON APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. NON-ILLUMINATED MODELS MOUNTING PANEL CUT-OUT 14.80 (.582) 1 OFF ON 16.20 - Flat seal (.637DIA) MATRIX MOUNTING 27.00 (1.063) 16.20 14.80 (.637) (.582) 2 CIRPC0M ECH 0.7 PANEL SWITCHES 27.00 (1.063) 8.00 Maxi (.314 max.) 2.30 (.090) 3.20 (.125) 4.20 (.165) 3.40 (.133) 2.40 (.094) 8.40 (.330)