ISR3Z1AD100 Apem

IS series Sealed pushbutton switches threaded bushing 12 mm momentary DISTINCTIVE FEATURES Threaded bushing models Compact, lightweight Tactile feedback Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS Front panel sealing according to IEC 60529 : IP67 Shock resistance : 100 g according to IEC 512-4, test 6c Vibration resistance : 10-500 Hz - 10 g according to IEC 512-4, test 6d Salt spray : IEC 512-6, test 11f Operating temperature : -40 C to +85 C (-40 F to +185 F) ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : 400 mA 32 VAC - 100 mA 48 VDC Initial contact resistance : 50 m max. Insulation resistance : 1 G min. at 500 VDC Dielectric strength : 1,000 Vrms Electrical life at full load : 500,000 cycles GENERAL SPECIFICATIONS Panel thickness : 1.5 mm (.059) min. - 4 mm (.157) max. Total travel : 1.7 mm (.066) 0,3 mm Typical operating force : 4 N 3 N Low level or mechanical life : 1,000,000 cycles Torque (applied to nut) : 1 Nm max. with metal nut U166 1.5 Nm max. with plastic nut U4248 Soldering : 300 C (572 F) max. for 3 seconds The company reserves the right to change specifications without notice. 1 SW-IS-1901 PANEL SWITCHESIS series Sealed pushbutton switches threaded bushing 12 mm momentary MATERIALS ELECTRICAL FUNCTIONS Case : thermoplastic UL94-V0 Actuator : polyamide 6/6 Bushing/bezel : polyamide 6/6 Contacts : silver, gold plated Terminal seal : epoxy APEM products may be recycled at end-of-life for the re-claiming of valuable Function 3 (NO) metal components. MOUNTING STANDARD BEZEL AGENCY APPROVAL PANEL CUT-OUT 2 A 125 VAC/250 VAC 12.90 (.507) File E83438 1 Availability : consult factory for details of approved models. 13.60 Marking : to order switches marked UL, (.535DIA) complete appropriate box of ordering format. 13.50 (.531DIA) - Flat seal MATRIX MOUNTING TERMINALS 20.00 20.00 (.787) (.787) 1.20 (.047) Solder lug S 2.80 (.110) MOUNTING REDUCED MODEL CISCOS-A ECH: 0.9 1.00 Straight P 17.50 17.50 5-05-03 (.039) PANEL CUT-OUT (.689) (.689) 12.90 (.507) 2 13.60 CISCOSP (.535DIA) ECH: 0.9 13.50 15.60 (.531DIA) 1.20 5-05-03 Quick-connect Z (.614DIA) (.047) - O-ring 2.80 (.110) CIMPE2 MATRIX MOUNTING 17.50 17.50 (.689) (.689) 12.90 (.507) 2 CIMPE2 CISCOSZ-A ECH1 le 29/03/2012 13.60 (.535DIA) DESSIN ECH 0.9 13.50 15.60 (.531DIA) (.614DIA) 5-05-03 2 CIMPE2 CIMPE2 ECH1 le 29/03/2012 PANEL SWITCHES 2.40 1.50 (.094) (.059) 8.40 (.330) 3.40 (.133) 0.80min-4.30Max (.031MIN.-.169MAX.) 1.50min-10.00Max (.059MIN.-.393MAX.) 20.00 17.50 (.787) (.689) 20 (.787) 1.50min-4Max (.059MIN.-.157MAX.) 0.80min-4.30Max (.031MIN.-.169MAX.) 1.50min-10.00Max (.059MIN.-.393MAX.) 17.50 (.689) 20 (.787)