IX series Pushbutton switches for harsh environments bushing 12 mm momentary NO & NC/NO DISTINCTIVE FEATURES Backlighted marking in a compact case Strong tactile feedback NO or NC/NO High sealing level, no space between actuator and bushing (IP67/IP69K) ENVIRONMENTAL SPECIFICATIONS Operating and storage temperature : -40 C to +85 C (-40 F to +185 F) Front panel sealing : IP67 according to IEC 60529, IP69K according to DIN 40050-9 Shock resistance: 100 g according to IEC 512-4, test 6c Salt spray: IEC 512-6, test 11f ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load: - Gold plated contact (0): 100 mA 28 VDC, 1,000,000 cycles - Silver contact (1): 2 A 28 VDC, 100,000 cycles Initial contact resistance : 100 m max. Insulation resistance : 1 G min. at 500 VDC Dielectric strength : 1,500 Vrms Contact bounce : 10 ms LED COMPONENT SPECIFICATIONS LED color Forward current Typ. forward voltage Max. forward voltage Red (R) 20 mA 1.9 V 2.5 V Yellow (Y) 20 mA 2.3 V 2.8 V A resistor must be series-connected by the user. Green (G) 20 mA 4 V 4.5 V Resistor value = supply voltage - LED forward voltage Blue (B) 20 mA 3.2 V 3.7 V LED forward current White (W) 20 mA 3.3 V 4 V Red/green (F) 20 mA Red: 2 V / green: 3.2 V Red: 2.8 V / green: 3.7 V The company reserves the right to change specifications without notice. 1 SW-IX-1807 PANEL SWITCHESIX series Pushbutton switches for harsh environments bushing 12 mm momentary NO & NC/NO GENERAL SPECIFICATIONS ELECTRICAL FUNCTION Panel thickness : 1.5 to 6 mm ILLUMINATED MODELS Total travel : 2 mm (.078) 0.3 mm Typical operating force : 7 N 2 N Low level/mech. life : 1,000,000 cycles Torque : 0.55 Nm (0.6 Nm max.) applied to nut Soldering : 320 C (608 F) max. for 3 sec. Function 3 (NO) Function 5 (NC/NO) MATERIALS NON-ILLUMINATED MODELS Case : thermoplastic UL94-V0 Actuator : silicone Bushing : ABS UL94 HB Contacts : 0 : gold plated 1 : silver 2 Output wires : AWG24, section 0.23 mm - 500 mm Terminal seal : epoxy Function 3 (NO) Function 5 (NC/NO) APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. CONNECTIONS MOUNTING WIRES TERMINALS PANEL CUT-OUT Contact NO : black color / Contact NC : blue color LED : + : red color - : white color TERMINALS MATRIX MOUNTING Solder lug S 2 PANEL SWITCHES