IZPR1S462L0S Apem

IZ series Rear mounted sealed pushbutton switches bushing 16 mm momentary DISTINCTIVE FEATURES Rear mounting for easier installation Momentary models Screw version available up to 4 A Sealed to IP67 Illuminated or non-illuminated ENVIRONMENTAL SPECIFICATIONS Front panel sealing : IP67 according to IEC 60529 Shock resistance : 100 g according to IEC 512-4, test 6c Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d Salt spray : IEC 512-6, test 11f Operating temperature : -40 C to +85 C (-40 F to +185 F) ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - Gold plated silver contacts (code 4) : 200 mA 48 VDC - Silver contacts (code 2) - screw terminals : 4 A 48 VDC Electrical life at full load : 500,000 cycles Initial contact resistance : 100 m max. Insulation resistance : 1 G min. at 500 VDC Dielectric strength : 1,000 Vrms 50 Hz LED COMPONENT SPECIFICATIONS LED color Forward current Typ. forward voltage Max. forward voltage Super red (L0S) 20 mA 2.1 V 2.3 V Yellow (L0Y) 20 mA 2.1 V 2.3 V A resistor must be series-connected by the user. Resistor value = supply voltage - LED forward voltage Green (L0G) 20 mA 2.1 V 2.3 V LED forward current Blue (L0B) 20 mA 3.2 V 3.8 V White (L0W) 20 mA 3.35 V 4.25 V On flying lead versions, the LED resistor can be integrated by APEM on request. Red/green (LSG) 20 mA Red: 1.95 V / green: 2.1 V 2.5 V Yellow/green (LYG) 20 mA Yellow: 2 V / green: 2.1 V 2.5 V The company reserves the right to change specifications without notice. 1 SW-IZMOM-1801 PANEL SWITCHESIZ series Rear mounted sealed pushbutton switches bushing 16 mm momentary GENERAL SPECIFICATIONS TERMINALS Panel thickness : 3 mm (.118) max. ILLUMINATED Total travel : 1.8 mm (.070) 0.3 mm LED Typical operating force : 6 N 2 N Cathode LED (-) Cathode Low level or mechanical life : 1,000,000 cycles (-) Torque : 0.7 Nm max. applied to nut Soldering : 320 C (662 F) max. for 3 sec. CIRCOSSL NON-ILLUMINATED MATERIALS 1.00 1.00X0.40 (.039) (.039X.015) 1.20 Case : thermoplastic UL94-V0 (.047) 2.00X0.40 2.80X0.50 (.078X.015) (.110X.019) Plunger : polyamide Bushing/bezel : polyamide Solder lug S Straight P Quick-connect Z CIPCOSS CIPCOSP CIPCOSZ Contacts : 4 : silver, gold plated 2 : silver (screw terminals) 2 Multi-wire leads AWG20, section 0.6 mm 2 LED wire : AWG26, section 0.12 mm ELECTRICAL FUNCTIONS Lens : polycarbonate Terminal seal : epoxy (except screw terminals) ILLUMINATED MODELS NON-ILLUMINATED MODELS APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. MOUNTING PANEL CUT-OUT 16.10 Function 3 (NO) Function 3 (NO) (.633DIA) 1 15.10 (.594) - Flat seal MATRIX MOUNTING 22.00 (.866) 16.10 (.633DIA) 15.10 (.594) 2 PANEL SWITCHES 3.00 Maxi 22.00 (.118MAX) (.866) 3.60 (.141) 1.50 (.059) 3.60 (.141) 7.10 (.279) 2.40 (.094)