KG382A2XXA21XX Apem

13-Serie KG-A-R1 08-Serie KG-A 05/11/14 14:50 Page61 KG series Power rocker switches Distinctive features and specifications UG1410A Protected rocker Illuminated or non-illuminated VDE (EN 61058-1) approved Sealed to IP65 ELECTRICAL SPECIFICATIONS MATERIALS Currrent/voltage rating : Case : thermoplastic UL94-V0 - functions 1 (ON-OFF) and 6 (ON-ON) : 15A 12VDC, 10A 24VDC max., Terminals : brass, silver plated 10mA 14VDC min. Contacts : silver grain - functions 4 ( ON ON ON) and 4-1R (ON ON MOM) : Contact roller : brass, nickel plated 8A 12VDC, 5A 24VDC max. - other functions : 10A 12VDC, 8A 24VDC max. AGENCY APPROVAL Initial contact resistance : 10 m max. at 1A 2VDC Insulation resistance : 1.000 M min. at 500VDC Dielectric strength : 2.000 Vrms 50 Hz min. between terminals 12(4)A 250VAC Electrical life : 10.000 cycles min. T85/55C Mechanical life : 2 position models : 100.000 cycles min. EN 61058-1 D 3 position models : 30.000 cycles min. Availability : double pole models, functions ON-OFF and ON-ON. ENVIRONMENTAL SPECIFICATIONS Marking : to order switches marked VDE, add VDE at the Degree of protection : IP65 according to IEC 60529 end of model number. Shock resistance : 100 g according to IEC 512-4, test 6c Vibration resistance : 10-500 Hz - 10 g according to IEC 512-4, test 6d Salt spray resistance : 96 hours according to IEC 512-6, test 11f Operating temperature : 2 position models : -40C to + 85C 3 position models : -10C to + 65C MATRIX MOUNTING 25.00 mini. 4.00 49.00 mini. (.984 min.) (.157) (1.929 min.) 12.20 (.480) Packaging unit : 40 pieces Sealing boots are available to protect the switches against dust and water. They are presented in section H. Dimensions : First dimensions are in mm while inches are shown as bracketed numbers. The company reserves the right to change specifications without notice. APEM www.apem.com D-6113-Serie KG-A-R1 08-Serie KG-A 05/11/14 14:50 Page62 KG series Power rocker switches Case 21.08 (.830) PANEL CUT-OUT Panel thickness : 0,8 mm to 4,6 mm Recommended thickness : between 2 mm and 3,5 mm 312 CASE + LAMPS ROCKER LENS MARKING MODEL STRUCTURE Flat seal 2-3 1-2 5-6 4-5 Single pole Double pole KG31 KG41 ON - OFF 20.00 10.50 23.50 12.00 KG44* ON ON ON (.787) (.413) (.925) (.472) KG44-1R* ON ON MOM KG35 KG45 MOM - ON KG36 KG46 ON - ON D KG37 KG47 MOM OFF MOM KG38 KG48 ON OFF MOM KG39 KG49 ON OFF ON * Function 4 : single pole in double pole case TERMINALS Side A 1.50 3.00x0.50 SI 3.10 (.059DIA) (.118DIAx0.50 IS) (.122DIA) 1 4 Terminals 1 to 6 are marked on the case. 2 5 6.35x0.80 6.35x0.80 6.35 0.80 (.25x.031) (.250x.031) (.031) (.25) Side A : terminals 1 and 4 0 2 3 Side B : terminals 3 and 6 6 3 Screw Solder lug / quick-connect Quick-connect Side B CONTACT MATERIALS A Silver grain D-62 www.apem.com APEM 4.50 (.177) 24.50 (.964) 14.65 6.85 11.00 (.576) (.269) (.433) 43.70 (1.720) 36.80 (1.449) 48.50 (1.909)