KH series Power rocker switches with protection guard DISTINCTIVE FEATURES Protected against accidental actuation Wide choice of colors Laser etched or pad printed symbols Illuminated or non-illuminated Sealed to IP69K ENVIRONMENTAL SPECIFICATIONS Front panel sealing : IP69K according to DIN 40050-9 Salt spray resistance : 96 hours according to IEC 512-6, test 11f Vibration resistance : 10-500 Hz / 10 g per IEC 60068-2-6 Operating temperature : -40 C to +85 C (-40 F to +185 F) ELECTRICAL SPECIFICATIONS Currrent/voltage rating with resistive load : - Silver plated contacts (A) : 5 A 24 VDC, 100,000 cycles 10 A 24 VDC, 10,000 cycles (terminals 6.35 x 0.8 only) - Gold plated contacts (D) : 20 mA 12 V, 150,000 cycles Current/voltage rating with lamp load - silver contacts (A) : - functions 6 : 100 W 24 VDC, 10,000 cycles - other functions : 60 W 24 VDC, 10,000 cycles Initial contact resistance : 10 m max. Insulation resistance : 1,000 M min. at 500 VDC Dielectric strength : 2,000 Vrms 50 Hz min. between terminals GENERAL SPECIFICATIONS Mechanical life : 150,000 cycles min. Panel thickness : 0.8 mm to 4.6 mm Recommended panel thickness : between 2 mm and 3.5 mm The company reserves the right to change specifications without notice. 1 SW-KH-1801 PANEL SWITCHESPANEL SWITCHESKH series Power rocker switches with protection guard PANEL CUT-OUT MATERIALS Case : PA 6-6 21.08 0/+0.3 (.830 0/+.012) Actuator : ABS Bezel : PA 6-6 Contacts & terminals : brass, solid silver grain, silver plated (A) or brass, solid silver grain, gold plated (D) Contact roller : brass, nickel plated APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. CKRDE3-C MATRIX MOUNTING TERMINALS 3.10 (.122DIA) 6.35x0.80 (.25x.031) Solder lug / quick-connect &+ Z Z Normalized quick-connect 6.35x0.8 1.20 (.047DIA) 2.80x0.80 (.110x.031) Normalized quick-connect 2.8x0.8 2 PANEL SWITCHES 36.80 0/+0.3 (1.449 0/+.012) 4.50 (.177)