MSS22 Apem

MSS Series Standard Size Slide Switches SPECIFICATIONS FEATURES Contact ratings: Gold 0.4 Volt-Amps (VA) max. at Bifurcated wiping contact design. 20 V max. (AC or DC) Epoxy sealed terminals. Silver 300 mA at 125 VAC or 30 VDC Wash-through open frame construction. Initial contact resistance: 20 milliohms max. Insulation resistance: 100 megohms min. at 500 VDC Reinforcing mounting legs. Dielectric strength: 500 volts RMS at sea level MATERIALS Electrical life: 10,000 cycles min. Operating temperature range: -10C to +60C Contacts & terminals: Gold or silver available (see contact ratings) Solder heat resistance: 260C max. for 3 seconds Housing: Tin/lead plated steel Actuator: Thermoplastic Solvent washing permissible Base: Phenolic laminated sheet Terminal seal: Epoxy MODEL NO. PLATING .079 (2.00) TRAVEL/THROW 1P2T MSS12A SILVER O MSS12AG GOLD VERTICAL ACTUATOR SCHEMATIC MECHANICAL OUTLINE P.C. BOARD LAYOUT MODEL NO. PLATING .157 (4.00) TRAVEL/THROW 1P2T MSS12AR SILVER .394 10.00 RIGHT ANGLE ACTUATOR SCHEMATIC MECHANICAL OUTLINE P.C. BOARD LAYOUT APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info apem.com O40 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE MSS Series Standard Size Slide Switches MODEL NO. PLATING .079 (2.00) TRAVEL/THROW 1P4T MSS14 SILVER SCHEMATIC MECHANICAL OUTLINE VERTICAL ACTUATOR P.C. BOARD LAYOUT MODEL NO. PLATING .079 (2.00) TRAVEL/THROW 2P2T MSS22 SILVER O MSS22G GOLD VERTICAL ACTUATOR SCHEMATIC MECHANICAL OUTLINE P.C. BOARD LAYOUT MODEL NO. PLATING .079 (2.00) TRAVEL/THROW 2P2T MSS225R SILVER MSS225RG GOLD RIGHT ANGLE ACTUATOR SCHEMATIC MECHANICAL OUTLINE P.C. BOARD LAYOUT MODEL NO. PLATING .079 (2.00) TRAVEL/THROW 2P3T MSS23 SILVER SCHEMATIC MECHANICAL OUTLINE P.C. BOARD LAYOUT VERTICAL ACTUATOR APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info apem.com O41 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE