Q19P5CZZRGB12ECA Apem

Q19 series 19 mm panel mount LED indicators DISTINCTIVE FEATURES 10 mm colored diffused epoxy lens or 10 mm water clear super bright LEDs Prominent and flush bezel styles (2.8 x 0.8) solder lug/faston terminals, pins or (200 mm long) wire terminations Custom engraving available Available in RGB ENVIRONMENTAL SPECIFICATIONS IP67 sealing option (EN60529) Operating & Storage Temperature Range: Rear plastic body: -30 C to +65 C ( 22 F to +149 F) Rear epoxy body: -40 C to +85 C ( 40 F to +185 F) GENERAL SPECIFICATIONS Max Reverse Voltage: 5 V Viewing Angle: 30100 (dependant on model) Life Expectancy: 100,000 hours Torque: 75 cNm (dependent on option) Maximum panel thickness 11 mm MATERIALS Plated brass bezel finished in bright chrome, black or satin grey and moulded polycarbonate rear body MOUNTING The company reserves the right to change specifications without notice. All LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal and subject to variations. 1 . IND-Q19-1904 LED INDICATORSQ19 series 19 mm panel mount LED indicators ELECTRICAL SPECIFICATIONS Voltage Operating Voltage Operating Current STANDARD LED INTENSITY (Min to Max) (Typical All Types) LED COMPONENT SPECIFICATIONS 02 (No Resistor) 1.8 to 3.3 VDC 20 mA max* Prominent and Flush Forward Voltage Recessed 6 VDC 5.4 to 6.6 VDC 20 mA HE Red 80 mcd 10 mcd 2.0 V 12 VDC 10.8 to 13.2 VDC 20 mA Green 60 mcd 5 mcd 2.2 V 24 VDC 21.6 to 26.4 VDC 20 mA Yellow 50 mcd 4 mcd 2.1 V 28 VDC 25.2 to 30.8 VDC 20 mA Blue 540 mcd 100 mcd 3.3 V 110 VAC 99 to 121 VAC 6 mA White 1000 mcd 150 mcd 3.3 V 220 VAC 207 to 235 VAC 3 mA Orange 80 mcd 200 mcd 2.2 V Bi-color (Typical) * Customer to supply resistor for desired operating 15/15 mcd 14/10 mcd 2.0 V/2.2 V (Red/Green) current. Tri-color (Typical) 60/50/50 mcd 15/10/30 mcd 2.0 V/2.2 V/2.1 V (Red/Green/Yellow) Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. ADDITIONNAL INFORMATION ON LED COMPONENTS The operating voltage must not be exceeded by SUPER BRIGHT LED INTENSITY more that 10% as this will result in reduced life LED COMPONENT SPECIFICATIONS expectancy Prominent and Flush Forward Voltage Luminous intensity is measured at 20 mA on a Recessed discrete led unless otherwise stated. HE Red 17,000 mcd 2,000 mcd 2.0 V Luminous intensities and color shades of white Green 11,000 mcd 680 mcd 3.5 V LEDs may vary within a batch. Yellow 4,000 mcd 350 mcd 2.3 V Luminous intensity will be reduced with lower Blue 2,500 mcd 250 mcd 3.3 V operating current. White 4,400 mcd 250 mcd 3.3 V Orange 2,800 mcd 300 mcd 2.1 V CONNECTIONS HYPER BRIGHT LED INTENSITY REAR EPOXY WIRES FOR RGB OPTION LED COMPONENT SPECIFICATIONS Prominent and Flush Forward Voltage M19 x 1.0 THREAD Recessed BLACK ANODE +VE HE Red 2,800 mcd 800 mcd 2.1 V RED CATHODE -VE GREEN CATHODE -VE Green 2,200 mcd 250 mcd 3.2 V BLUE CATHODE -VE Yellow 1,300 mcd 250 mcd 2.0 V Orange 850 mcd 200 mcd 2.1 V 4.8 13.5 RGB LED INTENSITY 0.187 0.531 210 17.5 190 ITEM SYMBOL CONDITION TYP. 8.268 0.689 7.480 V (R) IF=20 mA 2.1 F DC Forward Voltage V (B/G) IF=20 mA 2.1 F Iv (Red) 220 mdc Luminous Intensity Iv (Green) 500 mdc Iv (Blue) 100 mdc 2 LED INDICATORS 22.0 0.866