Q22F5BXXSG12E398 Apem

Q SERIES 22mm (.866 ) Panel Mount LED Indicators Distinctive features and specification Q22 VOY1609R3US Features 22mm panel mounting LED indicator 18mm colored diffused epoxy lens or 18mm super bright LEDs Plated brass bezel finished in bright chrome, black chrome or satin grey and moulded polycarbonate rear body Chamfer bezel option in 316L stainless steel and anodized aluminum finish only Prominent, Recess and flush bezel styles Custom engraving & secret until lit options available (2.8 x 0.8) solder lug/faston terminals, pins or (200mm long) wire terminations IP67 sealing option (EN60529) Supplied with fixing nut and spring washer NB: UL Recognized Component Max Reverse Voltage: 5V TECHNICAL SPECIFICATIONS Viewing Angle: 30100 (dependant on model) Life Expectancy: 100,000 hours Voltage Operating Voltage Operating Current (operating & storage) (Min to Max) (Typical All Types) Temperature Range: 40 to +85C Torque: 100cNm 22.00 +0.15/-0.0 05 (No Resistor) 3.3 to 9.9VDC 40mA max* 27,00 1,063 AF 3,25 0,128 12VDC 10.8 to 13.2VDC 40mA 24VDC 21.6 to 26.4VDC 40mA 28VDC 25.2 to 30.8VDC 40mA 110VAC 99 to 121VAC 5mA 220VAC 207 to 253VAC 3mA PANEL CUTOUT M22 x 1,0 THREAD Standard LED Intensity Prominent and Recessed Flush Forward Voltage HE Red 82mcd 70mcd 5.7V Green 95mcd 66mcd 6.0V Yellow 60mcd 59mcd 5.9V Blue 120mcd 101mcd 9.9V White 1,000mcd 150mcd 3.3V Bi-color (Typical) (Red/Green) 80/50mcd 80/50mcd 2.0V/2.2V Tri-color (Typical) (Red/Green/Yellow) 80/50/50mcd 80/50/50mcd 2.0V/2.2V/2.1V Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. Super bright LED (Diffused) Prominent and Recessed Flush Forward Voltage HE Red 465mcd 800mcd 5.7V Green 245mcd 980mcd 9.0V Yellow 365mcd 1,250mcd 6.0V Luminous intensity will be reduced with lower operating current. Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy. The company reserves the right to change specifications without notice. * Customer to supply resistor for desired operating current. Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated. Luminous intensities and color shades of white LEDs may vary within a batch. LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal. 1 www.apem.com APEMQ SERIES 22mm (.866 ) Panel Mount LED Indicators Technical Drawings SOLDER LUG/FASTONS PROMINENT BEZEL REAR EPOXY PINS M22x1,0 M22x1,0 6,50 0,256 19,00 0,748 6,50 0,256 10,00 0,394 14,25 0,561 8,65 0,341 14,25 0,561 16,00 0,630 35,00 1,378 18,00 0,709 REAR EPOXY WIRES SHORT BODY PINS M22x1,0 M22x1,0 6,50 0,256 200,0+/-10 7,874+/-0,393 6,50 0,256 17,50 0,689 14,25 0,561 14,25 0,561 14,50 0,571 18,00 0,709 19,50 0,768 SHORT BODY WIRES M22 x 1,0 200,0+/-10 6,50 0,256 7,874+/-0,393 14,25 0,561 20,00 0,787 SOLDER LUG/FASTONS REAR EPOXY PINS FLUSH BEZEL M22x1,0 M22x1,0 2,8x0,8 0,11x0,031 2,50 0,098 19,00 0,748 2,50 0,098 10,00 0,394 11,75 0,463 9,35 0,368 4,75 0,187 16,00 0,630 39,00 1,535 22,00 0,866 SHORT BODY PINS REAR EPOXY WIRES M22x1,0 M22x1,0 2,50 0,098 200,0+/-10 2,50 0,098 17,50 0,689 7,874+/-0,393 11,75 0,463 11,75 0,463 14,50 0,571 22,00 0,866 23,50 0,925 SHORT BODY WIRES M22x1,0 2,50 0,098 200,0+/-10 7,874+/-0,393 11,75 0,463 24,00 0,945 2 www.apem.com APEM 25,00 25,00 0,984 0,984 25,00 25,00 0,984 0,984 25,00 25,00 25,00 25,00 25,00 0,984 0,984 0,984 0,984 0,984 25,00 0,984 0,70 0,028 0,70 ,028 0,70 0,028 1,25 0,049 0,70 ,028 1,25 0,049 1,25 0,049 1,25 0,049 1,25 0,049 1,25 0,049 1,25 0,049 1,25 0,049