Q22Y5SXXB12E Apem

Q22 series 22 mm panel mount LED indicators DISTINCTIVE FEATURES 16.75 mm colored diffused epoxy lens or 16.75 mm super bright LEDs Secret until lit polycarbonate decals or custom engraving (2.8 x 0.8) solder lug/faston terminals, pins or (200 mm long) wire terminations Available in RGB ENVIRONMENTAL SPECIFICATIONS IP67 sealing option (EN60529) Operating & Storage Temperature Range: Rear plastic body: -30 C to +65 C ( 22 F to +149 F) Rear epoxy body: -40 C to +85 C ( 40 F to +185 F) GENERAL SPECIFICATIONS Max Reverse Voltage: 5 V Viewing Angle: 30100 (dependant on model) Life Expectancy: 100,000 hours Torque: 75 cNm (dependent on option) Maximum panel thickness 12 mm (Prominent), 10 mm (Flush) MATERIALS Plated brass bezel finished in bright chrome, black or satin grey and moulded polycarbonate rear body. Plastic bezel in ABS. MOUNTING The company reserves the right to change specifications without notice. All LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal and subject to variations. 1 . IND-Q22-1903 LED INDICATORSQ22 series 22 mm panel mount LED indicators ELECTRICAL SPECIFICATIONS Voltage Operating Voltage Operating Current STANDARD LED INTENSITY (Min to Max) (Typical All Types) 05 (No Resistor) 3.3 to 9.9 VDC 40 mA max* LED COMPONENT SPECIFICATIONS Prominent and 12 VDC 10.8 to 13.2 VDC 40 mA Flush Forward Voltage Recessed 24 VDC 21.6 to 26.4 VDC 40 mA HE Red 82 mcd 70 mcd 5.7 V 28 VDC 25.2 to 30.8 VDC 40 mA Green 95 mcd 66 mcd 6.0 V Yellow 60 mcd 59 mcd 5.9 V 110 VAC 99 to 121 VAC 5 mA Blue 120 mcd 101 mcd 9.9 V 220 VAC 207 to 235 VAC 3 mA White 1,000 mcd 150 mcd 3.3 V * Customer to supply resistor for desired operating Bi-color (Typical) current. 80/50 mcd 80/50 mcd 2.0 V/2.2 V (Red/Green) Tri-color (Typical) 80/50/50 mcd 80/50/50 mcd 2.0 V/2.2 V/2.1 V (Red/Green/Yellow) ADDITIONNAL INFORMATION ON LED COMPONENTS Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. Bi-color leds, by connecting the gold faston (+) one color is produced, by reversing the supply SUPER BRIGHT LED INTENSITY voltage another color is produced bi-colors are available up to 28 VDC LED COMPONENT SPECIFICATIONS The tri-color led has red and green leds when Prominent and Flush Forward Voltage Recessed both are connected yellow is produced HE Red 465 mcd 800 mcd 5.7 V The operating voltage must not be exceeded by Green 245 mcd 980 mcd 9.0 V more that 10% as this will result in reduced life Yellow 365 mcd 1,250 mcd 6.0 V expectancy Luminous intensity is measured at 20 mA on a discrete led unless otherwise stated. RGB LED INTENSITY Luminous intensities and color shades of white ITEM SYMBOL CONDITION TYP. LEDs may vary within a batch. V (R) IF=20 mA 2.1 F DC Forward Voltage Luminous intensity will be reduced with lower V (B/G) IF=20 mA 2.1 F operating current. Iv (Red) 220 mdc Iv (Green) 500 mdc Luminous Intensity Iv (Blue) 100 mdc CONNECTIONS REAR EPOXY WIRES FOR RGB OPTION M22 x 1.0 THREAD BLACK ANODE +VE RED CATHODE -VE GREEN CATHODE -VE BLUE CATHODE -VE 4.5 11.8 0.177 0.463 210 20.0 190 8.268 0.787 7.480 2 LED INDICATORS 28.0 1.102