Q6 series 6 mm panel mount LED indicators DISTINCTIVE FEATURES 3 mm colored diffused epoxy lens or 3 mm water clear super bright LEDs Prominent, recessed and flush bezel styles (2.0 x 0.5) solder lug terminals, pins or (200 mm long) wire terminations, other lengths available on request ENVIRONMENTAL SPECIFICATIONS IP67 sealing option (EN60529) Operating & Storage Temperature Range: Rear plastic body: -30 C to +65 C ( 22 F to +149 F) Rear epoxy body: -40 C to +85 C ( 40 F to +185 F) GENERAL SPECIFICATIONS Max Reverse Voltage: 5 V Viewing Angle: 30100 (dependant on model) Life Expectancy: 100,000 hours Torque: 4 cNm Maximum panel thickness 7 mm MATERIALS Plated brass bezel finished in bright chrome, black or satin grey and moulded polycarbonate rear body MOUNTING The company reserves the right to change specifications without notice. All LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal and subjet to variations. 1 IND-Q6-1911 LED INDICATORSQ6 series 6 mm panel mount LED indicators ELECTRICAL SPECIFICATIONS Voltage Operating Voltage Operating Current STANDARD LED INTENSITY (Min to Max) (Typical All Types) LED COMPONENT SPECIFICATIONS 02 (No Resistor) 1.8 to 3.3 VDC 20 mA max* Prominent and Flush Forward Voltage Recessed 6 VDC 5.4 to 6.6 VDC 20 mA HE Red 40 mcd 10 mcd 2.0 V 12 VDC 10.8 to 13.2 VDC 20 mA Green 50 mcd 12 mcd 2.2 V 24 VDC 21.6 to 26.4 VDC 20 mA Yellow 30 mcd 6 mcd 2.1 V 28 VDC 25.2 to 30.8 VDC 20 mA Blue 1,200 mcd 100 mcd 3.8 V * Customer to supply resistor for desired operating White 1,200 mcd 160 mcd 3.8 V current. Orange 60 mcd 10 mcd 2.0 V Bi-color (Typical) 20/15 mcd 10/8 mcd 2.0 V/2.2V (Red/Green) Bi-color - The color is changed by reversing the polarity of the supply voltage. SUPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Flush Forward Voltage Recessed HE Red 1,000 mcd 700 mcd 2.2 V Green 1,200 mcd 2,000 mcd 3.5 V Yellow 2,000 mcd 8,000 mcd 2.3 V Blue 1,600mcd 200 mcd 3.3 V White 1,200 mcd 350 mcd 3.3 V Orange 10,000 mcd 500 mcd 2.2 V HYPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Flush Forward Voltage Recessed HE Red 3,700 mcd 600 mcd 2.2 V Green 2,000 mcd 350 mcd 3.2 V Yellow 1,200 mcd 140 mcd 2.0 V Orange 4,500 mcd 400 mcd 2.2 V The operating voltage must not be exceeded by more than 10% as this will result in reduced life expectancy Luminous intensity is measured at 20 mA on a discrete led unless otherwise stated. Luminous intensities and color shades of white LEDs may vary within a batch. Luminous intensity will be reduced with lower operating current. 2 LED INDICATORS