QH16028RC Apem

QH series Halo LED illumination DISTINCTIVE FEATURES Single, dual and RGB colors available Designed to integrate with 16, 19 and 22 mm panel cutout switches and other APEM indicators 22 mm oversized version for integration with APEMs range of Emergency Stop switches Panel sealed up to IP67 200 mm 26 AWG UL1061 wire terminations ENVIRONMENTAL SPECIFICATIONS Panel Seal : IP67 to EN60529 : 1992 EMC Immunity : EN61000-4-3, 100V/m, extended to radiated fields in frequency range of 80MHz-2.7GHz, 1kHz 80% sine wave modulation EMC Emissions : EN61000-6-4 : 2011, Class B 30Mhz-11Ghz Electrostatic Discharge : EN61000-4-2 up to +/- 15 KV Operating Temperature Range : -30 C to +70 C (-22 F to +158 F) GENERAL SPECIFICATIONS Max Reverse Voltage : 5 VDC Life Expectancy : 50,000 Hours Single color PCB : 12 LEDs Dual color PCB : 12 LEDs, 6 of each (alternately placed) RGB color PCB : 12 LEDs MATERIALS Body : PC Lens : PC The company reserves the right to change specifications without notice. LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal and subject to variations. 1 IND-QH-17-07 LED INDICATORSQH series Halo LED illumination MOUNTING ELECTRICAL SPECIFICATIONS PANEL CUT-OUT Voltage Operating Voltage Operating Current (Min to Max) (Typical All Types) 12 VDC to 24 VDC 12.0 to 26.4 4.2 mA to 20 mA * Customer to supply resistor for desired operating current. STANDARD LED INTENSITY LED COMPONENT SPECIFICATIONS Intensity Forward Voltage (typical) HE Red 120 mcd 2.0 V Green 350 mcd 3.1 V Yellow 90 mcd 2.0 V Blue 90 mcd 3.1 V White 350 mcd 3.1 V RGB LED INTENSITY LED COMPONENT SPECIFICATIONS Intensity Forward Voltage (typical) Red 100 mcd 2.0 V Green 300 mcd 3.0 V Blue 90 mcd 3.0 V The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy Luminous intensity is measured at 20 mA on a discrete led unless otherwise stated. Luminous intensities and color shades of white LEDs may vary within a batch. Luminous intensity will be reduced with lower operating current. 2 LED INDICATORS