QRM14 series 14 mm rear panel mount LED indicators DISTINCTIVE FEATURES NVIS Green A, NVIS Green B, NVIS Yellow, NVIS Red, NVIS White NVIS compliant to MIL Std 3009 200 mm wire for 8 and 14 mm or rigid pin (1.00 mm) for 8 mm terminations ENVIRONMENTAL SPECIFICATIONS IP67 sealing option (EN60529) Operating Temperature Range: -40 C to +85 C ( 40 F to +185 F) Storage Temperature Range: -55 C to +100 C (-67 F to +212 F) GENERAL SPECIFICATIONS Max Reverse Voltage: 5 V Viewing Angle: 60 Life Expectancy: 100,000 hours Max Panel Thickness: 3.5 mm Torque: 60 cNm (8 mm), 75 cNm (14 mm) MATERIALS Body: Black chrome plated brass Lock Washer: Spring steel Nut: Black chrome plated brass Terminal Seal: Epoxy Panel Seal: Nitrile O-ring Wires: 24 AWG - Approved to UL1213 (8 mm), 22A WG - Approved to UL1007 (14 mm) MOUNTING 17,00 0,669 AF 3,00 0,118 12.9 0.507 14,0+0.15/-0.0 0.551+0.005/-0.0 M14 x 1,0 THREAD The company reserves the right to change specifications without notice. LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal and subject to variations. 1 IIND-QRM14-17-07 LED INDICATORSQRM14 series 14 mm rear panel mount LED indicators ELECTRICAL SPECIFICATIONS Voltage Operating Voltage Operating Current STANDARD LED INTENSITY (Min to Max) (Typical All Types) LED COMPONENT SPECIFICATIONS 02 (No Resistor) 1.8 to 3.8 VDC 20 mA max Prominent and Flush Forward Voltage Recessed 6 VDC 5.4 to 6.6 VDC 20 mA HE Red 80 mcd 10 mcd 2.0 V 12 VDC 10.8 to 13.2 VDC 20 mA Green 60 mcd 5 mcd 2.2 V 24 VDC 21.6 to 26.4 VDC 20 mA Yellow 50 mcd 4 mcd 2.1 V 28 VDC 25.2 to 30.8 VDC 20 mA Blue 540 mcd 100 mcd 3.3 V * Customer to supply resistor for desired operating White 1,000 mcd 150 mcd 3.3 V current. Orange 80 mcd 200 mcd 2.2 V Bi-color (Typical) 15/15 mcd 14/10 mcd 2.0 V/2.2 V (Red/Green) Tri-color (Typical) (Red/Green/Yel- 60/50/50 mcd 15/10/30 mcd 2.0 V/2.2 V/2.1 V low) Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. SUPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Flush Forward Voltage Recessed HE Red 17,000 mcd 2,000 mcd 2.2 V Green 11,000 mcd 680 mcd 3.5 V Yellow 4,000 mcd 350 mcd 2.3 V Blue 2,500 mcd 250 mcd 3.3 V White 4,400 mcd 250 mcd 3.3 V Orange 2,800 mcd 300 mcd 2.1 V HYPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Flush Forward Voltage Recessed HE Red 2,800 mcd 800 mcd 2.0 V Green 2,200 mcd 250 mcd 3.2 V Yellow 1,300 mcd 250 mcd 2.0 V Orange 850 mcd 200 mcd 2.1 V The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy Luminous intensity is measured at 20 mA on a discrete led unless otherwise stated. Luminous intensities and color shades of white LEDs may vary within a batch. Luminous intensity will be reduced with lower operating current. 2 LED INDICATORS