SP45Y000000 Apem

SP series Washable snap-action pushbutton switches DISTINCTIVE FEATURES Process sealed Front and rear sealing Process compatible (plain bushing models) Wave solderable Washable ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - gold plated brass contacts : 100 mA 30 VDC - silver or gold plated silver contacts : 1 A 30 VDC Initial contact resistance : 50 m max. Insulation resistance : 1,000 M min. Dielectric strength : 1,000 Vrms 50 Hz min. Electrical life : 60,000 cycles ENVIRONMENTAL SPECIFICATIONS Operating temperature : -20 C to +85 C (-4 F to +185 F) Storage temperature : -40 C to +85 C (-40 F to +185 F) Moisture : The insulating materials employed and the complete seal permit the switches to withstand a 56 days moisture test (IEC 68-2-3). Solderability : The switches are tested at 235C according to IEC 68-2-20 after accelerated aging. GENERAL SPECIFICATIONS Torque : 0.25 Nm (.18 Ft.lb) applied to nut (threaded bushing) Total travel : 0.50 mm (.019) Mechanical strength : Terminals are strengthened by a bracket or a ground plate ensuring the rigidity of the switch on the board. Actuator strength is 10 N max. Soldering - thermal shock (plain bushing models only) : The switches are especially designed for flow soldering at 260 C (500 F) during 5 seconds owing to high temperature polymer parts. Iron soldering (threaded bushing models) : 300 C (572 F) max., 5 seconds max. The company reserves the right to change specifications without notice. 1 SW-SP-1801 PANEL SWITCHESSP series Washable snap-action pushbutton switches MATERIALS TERMINALS Case and cover : UL94-V0, polyamide, glass filled or PES Actuator : polyamide, glass filled Contacts 1.10 (.043) 0 : brass, gold plated 0.60 1.90 (.023) (.070) 1 : silver 2 : silver, gold plated Terminal seal : epoxy APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. ELECTRICAL FUNCTIONS AGENCY APPROVAL 1 A 120 VAC Availability : all models with silver or gold plated silver contacts. Marking : to order switches marked UL , complete 12 3 appropriate box of ordering format. PANEL CUT-OUT 2 PANEL SWITCHES 2.45 (.096) 1.90 (.074) 4.25 (.167)