SY246CD6+U622 Apem

03-Serie S-SR-A-R1 03-Srie S-SR-A 05/11/14 14:57 Page9 S and SR series Washable rocker and paddle switches Distinctive features and specifications UG1410A Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible (S series) Wave solderable Washable Optional ESD protection ELECTRICAL SPECIFICATIONS MATERIALS Max. current/voltage rating with resistive load : Case and cover : UL94-V0, - silver contacts (A or 1) : 4A 30VDC polyamide, glass filled or PES - brass, gold plated contacts (CD or 0) : 0,4VA 20VAC or DC Actuator : polyamide - silver, gold plated contacts (AD or 2) : 4A 30VDC Contacts (300mA 30VDC for gold plating) CD or 0 : brass, gold plated Initial contact resistance : 10 m max. A or 1 : silver Insulation resistance : 1.000 M min. AD or 2 : silver, gold plated Dielectric strength : 1.000 Vrms 50 Hz min. Terminal seal : epoxy D Electrical life with nominal load : Contacts Number of cycles 2 positions 3 positions A or 1 40.000 40.000 CD or 0 100.000 50.000 AD or 2 40.000 40.000 GENERAL SPECIFICATIONS AGENCY APPROVALS Mechanical strength : Terminals are strengthened by a bracket or a ground plate ensuring the 2A 250VAC rigidity of the switch on the board. Actuator strength is 10N max. 4A 125VAC Operating temperature : -20C to +85C Availability : consult factory for Storage temperature : -40C to +85C details of approved models. Moisture : The insulating materials employed and the complete seal permit the switches Marking : to order switches to withstand a 56 days moisture test (IEC 68-2-3). marked UL, complete appropriate Soldering - thermal shock (S series only) : box of ordering format. The switches are especially designed for flow soldering at 260C during 5 seconds owing to high temperature polymer parts. Iron soldering (SR series) : 300C 5 sec. max. Solderability : The switches are tested at 235C according to IEC 68-2-20 after accelerated aging. The company reserves the right to change specifications without notice. APEM www.apem.com D-903-Serie S-SR-A-R1 03-Srie S-SR-A 05/11/14 14:57 Page10 S series Washable rocker and paddle switches Overview S SERIES Terminals Bushing and terminals Number of poles Electrical functions W Right angle, 2 Terminal spacing 3 Single pole 6 ON - ON horizontal 4,7 (.185) or 3,81 4 Double pole 9 ON OFF ON mounting (.150) 7 MOM OFF MOM WW Right angle, 0 Terminal spacing 8 ON OFF MOM vertical mounting 5,08 (.200) 2 ON - MOM Y Bracket mounting (SW switches) 4TH ON ON ON D Lever Special options / Approvals Contact materials Actuators insulated models -6 UL Rockers A Silver Blank No special U620 Large AD Silver, gold For rocker and Availability : paddle. requirement U730 Small plated Consult factory for X653 Vertical right angle CD Brass, gold details of approved Paddles with stand-off plate plated models. U610 Narrow X1159 Insulated models U700 Broad See following pages. Bezels For SK models U1200 U1210 For LED For SW, SWW and SY models U4602 ABOUT THIS SERIES On the following pages, you will find successively : - model structure of switches - options in the same order as above Specifications are on previous page. Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Packaging unit : 25 pieces to 50 pieces depending on models. D-10 www.apem.com APEM