TL series Subminiature washable toggle switches DISTINCTIVE FEATURES Process sealed Single piece case Front and rear sealing Wide variety of contact materials Same PCB layout as TP, TR and TG subminiature switches ENVIRONMENTAL SPECIFICATIONS Operating temperature : -30 C to +85 C (-22 F to +185 F) Moisture : 21 days 95 % (NFC 20-603 - IEC 68-2-3) ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - gold plated contacts : 0.4 VA 20 V max. AC or DC - silver plated contacts : 0.5 A 48 V max. AC or DC Minimum load : 10 mA 50 mV - 10 A 5 VDC Contact resistance : 20 m max. Insulation resistance : 1,000 M min. at 500 VDC Dielectric strength : 1,000 Vrms 50 Hz min. between terminals and frame 500 Vrms 50 Hz min. between terminals Electrical life at full load : Contacts Number of cycles 2 positions 3 positions Gold plated 60,000 30,000 Silver plated 20,000 10,000 GENERAL SPECIFICATIONS Strength of terminals : pull-out force - 10 N max. Cleaning : solvents or water + detergent Wave soldering : 260 C (500 F) - 5 sec. The company reserves the right to change specifications without notice. 1 SW-TL-1803 PANEL SWITCHESPCB SWITCHESTL series Subminiature washable toggle switches MATERIALS Case : PBT Actuator : brass, nickel plated Contacts and terminals : 0 : brass, gold plated 1 : brass, silver plated 3 : brass, gold plated (1,27 micron gold) 8 : contact brass, gold plated + tin plated terminals 9 : contact brass, gold plated (1,27 micron gold) + tin plated terminals Terminal seal : epoxy APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. TERMINALS 0.70 (.027) 0.70 (.027) ELECTRICAL FUNCTIONS 1 23 PCB MOUNTING 2 PCB SWITCHES 14.20 (.559) 3.30 (.129) 14.30 (.562) 15.20 (.598) 3.05 (.120) 5.55 (.218) 5.00 (.196) 9.60 (.377) 4.60 (.181) 8.65 (.340)