TS series Proportional miniature thumb controls non-contacting Hall effect technology DISTINCTIVE FEATURES One or two axis Analog, PWM or USB outputs IP67 Above panel sealing mounting Rear or drop-in mounting Pushbutton option ENVIRONMENTAL SPECIFICATIONS Operating Temperature: -40 C to +85 C (-40 F to +185 F) Storage Temperature: -40 C to +85 C (-40 F to +185 F) 1 Above Panel Sealing: IP67, IP69K (subject to mounting style & final specifications) EMC Immunity Level: EN61000-4-3 EMC Emissions Level: EN61000-6-3:2001 ESD: EN61000-4-2 SENSOR SPECIFICATIONS Technology: Hall effect sensors, single or dual Supply Voltage Range: 5.00 V 0.01 VDC Supply Current: 11 mA max Ratiometric Output Options: See options Reverse Polarity max: -10 V Transient overvoltage max: 16 V Start-up time: 15 ms max Output Impedance: 2 Return to Center Voltage Tolerance: 200 mV initial U.S. Patent D816,169 S U.S. Patent D732,047 S U.S. Patent D816,169 S U.S. Patent D734,138 S The company reserves the right to change specifications without notice. 1 JST-TS-1810 JOYSTICKSTS series Proportional miniature thumb controls non-contacting Hall effect technology PUSHBUTTON SWITCH MECHANICAL SPECIFICATIONS SPECIFICATIONS (OPTION 6 HANDLE) 2 Operating Force: 3.1 N 0.5 N (0.70 lbf 0.11 lbf) 2 Maximum Vertical Load: 200 N (45 lbf) Electrical Life: 100,000 cycles 2 Maximum Horizontal Load: 150 N (33.7 lbf) Rating: 50 mA, 12 VDC. Mechanical Angle of Movement: 50 X & Y axis (subject to Terminal: Brass with silver plating limiter plate) Contact Resistance: 100 m max Expected Life: 1 million cycles Insulation Resistance: 100 M min. 500 VDC Mass/Weight: 18.25 g 5.0 g (0.64 oz 0.18 oz) Dielectric Strength: 250 VAC /1 minute Lever Action (centering): Spring Contact Arrangement: 1 pole 1 throw 1 All options are IP68 and IP69K rated, however drop-in mounting does not prevent panel ingress. Stop Strength: Max 3 kgf vertical static load for 15 2 Force applied to the top of the castle cap. seconds Operating Temperature: -25 C to +70 C MATERIALS (-4 F to +158 F) Storage Temperature: -30 C to +85 C Body: Glass filled nylon (-22 F to +158 F) Threaded Housing: Black oxide plated brass Vibration Resistance: MIL-STD-202F METHOD 201A Boot: Silicone Shock Resistance: MIL-STD-202F METHOD 213B Handles: 1, 2, 3, E, F, G - Glass filled nylon 4, 5, 6, 7, 8 - Silicone LED SPECIFICATIONS B, C, D - Thermoplastic elastomer (OPTION H HANDLE) H - Polycarbonate APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. LED CONTROL OPERATING VOLTAGE OPERATING CURRENT 1 ON, driven by joystick supply - 6 mA voltage CONNECTIONS 2 User 5 V 6 mA controlled WIRING SPECIFICATION (Termination options 1 & 2) Ground & button common, Black or LED common 1 Red Power (5 V) Blue X axis output (alpha) Yellow Y axis output (alpha) Pushbutton switch (option 6 handle) Orange 2 2 or LED supply (option H handle) Blue/White Stripe X axis output (beta) Yellow/Black Stripe Y axis output (beta) Red/White Stripe Power (5 V) (beta) Black/White Stripe Ground (beta) 1 Hall sensor and LED supply (LED control option 1) 2 User controllable (LED control option 2) 2 JOYSTICKS