VL1CK0P300 Apem

VL series Panel mount LED indicators Distinctive features and specifications UG1006-A Indicators with built-in LED New colours : blue and white Antirotation flatted bushing 2 bushing diameters : 6 mm (.236) and 8 mm (.314) Sealed or unsealed Bright or matt black chrome finish ELECTRICAL SPECIFICATIONS MATERIALS Insulation resistance : 1.000 M min. Bushing and collar : brass, bright Dielectric strength : 250 Vrms 50 Hz min. or matt black chrome plated Electrical life at high temperature : 72 H at 85C Lens : polycarbonate LED LED specifications (TA 25C) Forward voltage : 2VDC ( 2,6V) Nominal current : 10mA GENERAL SPECIFICATIONS Max. surge current (tp < 10s) : 0,5A Torque : 1,25 Nm (.922 Ft.lb) Max. reversed voltage : 25V max. applied to nut Max. forward current : 40mA Climatic category : 40/085/21 Max. power dissipation : 100mW Protection level for sealed models: Correct polarity of D.C supply to diode electrodes must be observed : IP 67 according to IEC 529 - longer lead : anode (+) In accordance with NFC 93680 - shorter lead : cathode (-) on flat side of bushing (see drawings). standard The LED is not removable. PANEL CUT-OUT STANDARD HARDWARE For 6 (.236) For 8 (.314) For 6 (.236) For 8 (.314) 8.20 2.00 3.00 10.00 9.00 6.20 (.322 DIA) (.078) (.118) (.393) (.354) (.244 DIA) 2.50 3.50 6 x 0.75 8 x 0.75 (.098) (.137) (.236 DIA x 0.75 IS) (.314 DIA x 0.75 IS) ABOUTTHISSERIES Complete part numbers are shown on the following pages. Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. I Mounting accessories : standard hardware supplied with all models : nickel plated hex nut 9 mm (.354) across flats for indicators 6 (.236) or 10 mm (.393) across flats for indicators 8 (.314). Packaging unit : 50 pieces. APEM www.apem.com I-3 New VL series Panel mount LED indicators Flat Diameter 6 (.236) - unsealed LED Bright finish Matt black 0.50 6.00 x 0.75 (.019) (.236 DIA x 0.75 IS) colour (standard) finish (+) Red VL1000P600 VL100GP600 Yellow VL1000P500 VL100GP500 Green VL1000P300 VL100GP300 Blue VL1000P100 VL100GP100 (-) 2.50 7.50 1.30 Maxi (.098) (.295) (.051 MAX) White VL1000P700 VL100GP700 Max. panel thickness 5,50 (.216) Flat Diameter 8 (.314) - unsealed 0.50 8.00 x 0.75 LED Bright finish Matt black (.019) (.314 DIA x 0.75 IS) colour (standard) finish (+) Red VL3000P600 VL300GP600 Yellow VL3000P500 VL300GP500 Green VL3000P300 VL300GP300 (-) Blue VL3000P100 VL300GP100 3.00 11.00 1.60 Maxi (.118) (.433) (.062 MAX) White VL3000P700 VL300GP700 Max. panel thickness 8 (.314) Flat O-ring Diameter 6 (.236) - sealed 6.00 x 0.75 (.236 DIA x 0.75 IS) LED Bright finish Matt black 0.50 (.019) colour (standard) finish 1 (+) VL1CK0P600 VL1CKGP600 Red VL1CK0P500 VL1CKGP500 Yellow VL1CK0P300 VL1CKGP300 Green 1.30 Maxi VL1CK0P100 VL1CKGP100 Blue (.051 MAX) (-) VL1CK0P700 VL1CKGP700 5.60 5.70 White (.220) (.224) Lens cap in the same colour as the LED. Max. panel thickness 3,70 (.145) Flat O-ring Diameter 8 (.314) - sealed 8.00 x 0.75 (.314 DIA x 0.75 IS) 0.50 LED Bright finish Matt black (.019) colour (standard) finish 1 (+) VL3CK0P600 VL3CKGP600 Red VL3CK0P500 VL3CKGP500 Yellow I VL3CK0P300 VL3CKGP300 Green (-) VL3CK0P100 VL3CKGP100 Blue 9.00 7.00 1.60 Maxi (.354) (.275) (.062 MAX) VL3CK0P700 VL3CKGP700 White Lens cap in the same colour as the LED. Max. panel thickness 4 (.157) Option : Bushing without flat, lockwasher : on request. I-4 www.apem.com APEM 7.50 (.295) 5.50 7.50 (.216) (.295) 5.50 (.216) 0.50 (.019) 0.50 0.50 (.019) 0.50 (.019) (.019) 12.70 (.500 DIA) 9.00 (.354 DIA) 11.00 9.50 (.433 DIA) (.374 DIA) 9.00 5.50 (.354 DIA) (.216 DIA) 5.90 3.90 3.90 5.90 (.232 DIA) (.153 DIA) (.153 DIA) (.232 DIA) 2.54 2.54 2.54 2.54 (.100) (.100) (.100) (.100)