01-Serie ZP-A 01-Serie ZP-A 31/10/14 09:13 Page2 ZP series Tiny pushbutton switches - metal bushing Distinctive features - Specifications - Overview UG1410A 4,83 mm threaded bushing Solder lug and straight PC terminals ELECTRICAL SPECIFICATIONS MATERIALS Max. current/voltage rating with resistive load : Case : thermoplastic UL94-V0 - gold plated contacts : 0,4VA 20V max. AC or DC Actuator : thermoplastic UL94-V0 - silver plated contacts : 0,5A 48V max. AC or DC Bushing : zamac, tin plated B2 Minimum load : 10mA 50mV - 10A 5VDC Contacts and terminals : Contact resistance : 50 m max. 0 : brass, gold plated (standard) Insulation resistance : 1.000 M min. at 500VDC 1 : brass, silver plated Dielectric strength: 1.000 Vrms 50 Hz min. between terminals and frame 3 : brass, gold plated 500 Vrms 50 Hz min. between terminals (1,27 micron gold) Electrical life at full load : Terminal seal : epoxy - gold plated contacts : 60.000 cycles - silver plated contacts: 20.000 cycles SOLDERING Hand soldering : 280C max. for GENERAL SPECIFICATIONS 5 seconds max. Travel : Wave soldering : 260C max. for - function 2 (ON-MOM) : 1,2 mm (.047) 0,3 (.11) 5 seconds max. - function 3 (OFF-MOM) : 1 mm (.039) 0,3 (.11) Strength of terminals : pull-out force 10N max. Torque : 1Nm max. applied between the 2 nuts Max. panel thickness : 1,5 mm (.059) with 2 nuts Operating temperature : -30C to +85C Moisture : 21 days 95 % (NFC 20-603 - IEC 68-2-3) ZP SERIES Number of Electrical functions Terminals Contact and Bushings poles terminal materials 2 ON - MOM S0 Solder lug 01 Threaded, 3 Single 0 Brass, gold plated 3 OFF - MOM P0 Straight PC with flat pole 1 Brass, silver plated 3 Brass, gold plated Models (1,27 micron gold) 00 Standard model Dimensions : First dimensions are in mm while inches are shown as bracketed numbers. Packaging unit : 100 pieces Mounting accessories : Standard hardware supplied with all models : 2 hex nuts 7 mm (.275) across flats P/N U5731, 1 locking ring P/N U5831 and 1 lockwasher P/N U5841. The company reserves the right to change specifications without notice. B2-2 www.apem.com APEM01-Serie ZP-A 01-Serie ZP-A 31/10/14 09:13 Page3 ZP series Tiny pushbutton switches - metal bushing Single pole Gold plated or silver plated contacts Epoxy sealed terminals 0.75 0.70 (.029) (.027) 3 2 1 1 3 1.50 (.059) Function 2 Function 3 (ON - MOM) (OFF - MOM) MODEL 00 STRUCTURE B2 Shown in function 2 (ON-MOM) 2.50 Flat (.098 DIA) Solder lug terminals : ZP..S0 4.83-48UNS-2A (10-48UNS-2A) 6.00 (.236 DIA) EPOXY 3 1 2 ZP32S0 ON MOM 1.50 2.54 (.059) (.100) 0.50 ZP33S0 OFF MOM (.019) 8.10 (.318) 4.39 (.172) Flat 2.50 Straight PC terminals : ZP..P0 (.098 DIA) 4.83-48UNS-2A (10-48UNS-2A) 6.00 (.236 DIA) EPOXY ZP32P0 ON MOM 3 1 2 2.54 (.100) ZP33P0 OFF MOM 0.50 (.019) 1.10 8.10 (.043 DIA) (.318) CONTACT & TERMINAL MATERIALS 0 : Brass, gold plated (standard) - 1 : Brass, silver plated 00 3 : Brass, gold plated (1,27 gold) BUSHING 4.90 4.90 2.40 (.193 DIA) (.193 DIA) (.094 DIA) 00 4.39 4.50 6.10 (.172) (.177) (.240) 01 APEM www.apem.com B2-3 2.54 (.100) 1.50 (.059) 8.60 5.60 3.95 4.00 8.60 5.60 3.95 (.338) (.220) (.156) (.157) (.338) (.220) (.156) 5.00 5.00 (.196) (.196) 3.30 (.129) 3.30 2.80 (.129) (.110) 0.50 0.50 (.019) (.019)