DOMESTIC REPRESENTATIVES & DISTRIBUTORS INTERNATIONAL REPRESENTATIVES & DISTRIBUTORS TOLL FREE: 800.498.9034 YOUR ACCOUNT FACEBOOK TWITTER LINKEDIN YOUTUBE Ask the Experts Enter your search Bushing Seals Bushing Seals pack all the sealing power of a boot, but focus on the mounting hole Overview as opposed to the switch itself. Installed before a switch locking nut, the bushing seal fits snugly against either the front or back side of the mounting panel, sealing Toggle Boots the mounting hole from any possible intrusion. Bushing Seals are small, inconspicuous and perfect for ready-sealed toggle, push button and rotary Pushbutton switches. Boots Rotary Boots MATERIAL SPECIFICATIONS For APM Hexseal Standard Bushing Seals Circuit Breaker Boots Elastomer: Silicone conforms to A-A-59588, Class 3A, GR50 , Gray Mounting Nut: 18/8 Stainless Steel Rocker Boots Temperature Range: -103 F to +400 F ( -75 C to +204 C) Resistant to: Splash, salt spray, sunlight, ozone, weather, fungus, dust, Bushing Seals and most acids and lubricating oils. Shelf Life: Excess of 25 years. Durometer options available. Please contact APM Hexseal for details. Fig.1 Click to enlarge Sealing Boots & Bushings Sealing Hardware Contact Toggle Boots Seelskrews & Seelbolts 44 Honeck Street, Englewood, NJ 07631 U.S.A. Pushbutton Boots Seelnuts Toll Free : 800.498.9034 Rotary Boots Seeloc Washers Tel : 201.569.5700 Circuit Breaker Boots eMail : info apmhexseal.com Rocker Boots Bushing Seals FACEBOOK TWITTER LINKEDIN YOUTUBE Copyright 2017 All Rights Reserved APM Hexseal HEXSEAL, SEELSKREW, SEELBOLT, SEELNUT, SEELRIVET, SEELOC are registered trademarks of APM Hexseal Corp.