SPECIFICATION
Material: Boot: APM RUBRGLAS (transparent silicone rubber), Notes:
conforms to type ASTM D 1418. Frame: steel, zinc plated with 1. Mounting screws are supplied in lengths shown unless otherwise
chromate finish. Screw: SEELSKREW (self-sealing screws), specified.
stainless steel with silicone rubber O-ring. 2. New sizes and types of RUBRGLAS-SEELS are being added
Temperature Range: HEXSEAL: -80F to +400F regularly. Please request other types and styles as required.
Pressure Range: Dust tight and splashproof. Agency Recognition: Front Panel mounted Circuit Breaker Boots
Operational Life: 10,000 actuations (minimum). are UL- listed to UL Std. 50, types 1,2,3,12,12K and 13.
Shelf Life: Excess of 25 years. Back-of-Panel mounted Circuit Breaker boots are UL-listed to UL
Resistant to: Salt spray, sunlight, ozone, weather, corona and most Std. 50, type 1. Also meet CSA standards.
acids.
NOTES:
ASSEMBLY CONSISTS OF 1 BOOT, MAT'L APM RUBRGLAS , 1 FRAME
MAT'L C.R.S. ZINC PLATED WITH CHROMATE FINISH, & 2#6-32 APM SEELSKREWS LENGTH =3/8
UNLESS OTHERWISE SPECIFIED
TOLERANCES: UNLESS OTHERWISE NOTED 1/32
FRAME MAT'L CHANGED, WALL THICKNESS TOL. 0.010 CHANGED TO 0.005, HOLE DIM. 0.160" CHANGED TO
I S. GOK 05.05.09
0.149", DELETED TODESIGN TO MEET MIL-5423" and DELETED TO SEELSKREW INFORMATION
H CAD COMPUTER GENERATED 11.13.02
TRIGGER ADDED M. MORSE
G 04.26.93
DESCRIPTION
REV. DATE
MAXIMUM AND MINIMUM MEASURE-
CIRCUIT BREAKER BOOT,
ENG.
MENTS ARE STATED DIRECTLY ON
EACH DIMENSION.
TOGGLE, WIDE ANGLE, DWN. J. PALUMBO
03.28.59
MAT'L: RUBRGLASS T
TRANSPARENT (3 POLES) CHKD. J. CELLA
05.05.09
POLYMER TYPE ASTM D 1418
SCALE
FINISH: GRADE 50
APM-HEXSEAL CORPORATION CT-1015
1 : 1
TRANSPARENT
THIS DRAWING COVERS PROPRIETARY ITEM AND IS THE PROPERTY OF THE APM-HEXSEAL CORPORATION.
THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE WRITTEN APPROVAL OF AN OFFICER OF THE APM-HEXSEAL CORPORATION.
TITLE:
DWG. NO.