SPECIFICATION Material: Boot: APM RUBRGLAS (transparent silicone rubber), Notes: conforms to type ASTM D 1418. Frame: steel, zinc plated with 1. Mounting screws are supplied in lengths shown unless otherwise chromate finish. Screw: SEELSKREW (self-sealing screws), specified. stainless steel with silicone rubber O-ring. 2. New sizes and types of RUBRGLAS-SEELS are being added Temperature Range: HEXSEAL: -80F to +400F regularly. Please request other types and styles as required. Pressure Range: Dust tight and splashproof. Agency Recognition: Front Panel mounted Circuit Breaker Boots Operational Life: 10,000 actuations (minimum). are UL- listed to UL Std. 50, types 1,2,3,12,12K and 13. Shelf Life: Excess of 25 years. Back-of-Panel mounted Circuit Breaker boots are UL-listed to UL Resistant to: Salt spray, sunlight, ozone, weather, corona and most Std. 50, type 1. Also meet CSA standards. acids. NOTES: ASSEMBLY CONSISTS OF 1 BOOT, MAT L APM RUBRGLAS , 1 FRAME MAT L C.R.S. ZINC PLATED WITH CHROMATE FINISH, & 6 6-32 APM SEELSKREWS LENGTH =3/8 UNLESS OTHERWISE SPECIFIED TOLERANCES: UNLESS OTHERWISE NOTED 1/32 FRAME MAT L CHANGED, WALL THICKNESS TOL. 0.010 CHANGED TO 0.005, HOLE DIM. 0.160 CHANGED TO J S. GOK 05.05.09 0.149 , DELETED TODESIGN TO MEET MIL-5423 and DELETED TO SEELSKREW INFORMATION SCREW QUANTITY CHANGED S. GOK I 11.05.08 H CAD COMPUTER GENERATED 11.13.02 G TRIGGER ADDED M. MORSE 04.26.93 DESCRIPTION DATE REV. MAXIMUM AND MINIMUM MEASURE- CIRCUIT BREAKER BOOT, ENG. MENTS ARE STATED DIRECTLY ON EACH DIMENSION. TOGGLE, WIDE ANGLE, DWN. J. PALUMBO 12.29.58 MAT L: RUBRGLASS T TRANSPARENT (3 POLES) CHKD. J. CELLA 05.05.09 POLYMER TYPE ASTM D 1418 SCALE FINISH: GRADE 50 CT-1050 APM-HEXSEAL CORPORATION 1 : 1 TRANSPARENT THIS DRAWING COVERS PROPRIETARY ITEM AND IS THE PROPERTY OF THE APM-HEXSEAL CORPORATION. THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE WRITTEN APPROVAL OF AN OFFICER OF THE APM-HEXSEAL CORPORATION. TITLE: DWG. NO.