SPECIFICATIONS Material: HEXSEALS:Silicone rubber conforms to A-A-59588 Class 3B, GR 50 unless otherwise specified. Mounting Nut: HEXSEALS: Brass, nickel-plated (unless otherwise noted) Temperature Range: HEXSEALS: -94F to +400F Pressure Range: Exceeds 15 psi internal and 1500 psi external. Operational Life: 50,000 actuations (minimum). Shelf Life: Excess of 25 years. Resistant to: Salt spray, sunlight, ozone, weather, fungus, and most acids and lubricating oils Agency Recognition: E-SEELS and HEXSEALS are UL-listed to UL Std. 50 types 1-13, and meet CSA standards. Installation: If a reducing adaptor is required - see page 14 of HEXSEAL catalog HEX200 for part numbers and drawing. 03.04.09 F HOLE DIMENSION WAS CORRECTED from 0.078 to 0.109 PER MS SPEC. S. GOK E CAD COMPUTER GENERATED 09.23.02 10.11.74 D REDRAWN REV. DESCRIPTION DATE MAXIMUM AND MINIMUM MEASURE- ENG. MENTS ARE STATED DIRECTLY ON BOOT TOGGLE SWITCH EACH DIMENSION. 06.06.61 DWN. M.M. EXPOSED BAT (N-1030B) MAT L: Silicone Rubber CHKD. A-A-59588, Gr.50 SCALE (N-1030B) APM-HEXSEAL CORPORATION 4 : 1 HEXSEAL FINISH: GRAY THIS DRAWING COVERS PROPRIETARY ITEM AND IS THE PROPERTY OF THE APM-HEXSEAL CORPORATION. THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE WRITTEN APPROVAL OF AN OFFICER OF THE APM-HEXSEAL CORPORATION. TITLE: DWG. NO.