SM3X12MM-2701 APM

ALL DIMENSIONS IN MILLIMETERS RECOM. CLEAR. HOLE THREAD SIZE C max D max LENGTH TYPICAL CLEARANCE HOLE DETAIL MIN. MAX. M 2x0.4 4.242 2.310 2.410 4 to 12 mm 1.372 M 2.5x0.45 5.563 1.727 2.930 3.030 4 to 12 mm M 3x0.5 6.223 1.905 3.550 3.650 4 to 40 mm M 3.5x0.6 7.518 2.261 3.970 4.095 4 to 40 mm M 4x0.7 8.179 2.438 4.390 4.540 4 to 40 mm M 5x0.8 9.703 3.048 5.560 5.685 6 to 40 mm M 6x1 12.497 3.734 6.730 6.830 6 to 50 mm M 8x1.25 15.621 4.521 8.450 8.550 6 to 50 mm M 10x1.5 19.685 5.588 10.530 10.640 6 to 50 mm M 12x1.75 25.273 7.112 12.790 12.900 6 to 50 mm STANDARD SPECIFICATIONS & COMMON OPTIONS (HOW TO ORDER) STD. SCREW MATERIAL: TYPE 18/8 STAINLESS STEEL PER DFARS (OTHER MATERIALS AVAILABLE) STD. SCREW FINISH: NATURAL (PASSIVATED PER MIL-STD-171 UNLESS OTHERWISE SPECIFIED) STD. O-RING MATERIAL: SILICONE RUBBER (SEE TABLE FOR O-RING OPTIONS) AVAILABLE O-RING MATERIALS COMMON OPTIONS SAMPLE CATALOG Compound Service SM2X8-2701-BLKOX Material SUFFIX DESCRIPTION NO. Temp. Suffix Silicone -150F to 500F BLACK OXIDE PER PAN HEAD WITH -2701 Rubber -101C to 260C -BLKOX MIL-C-13924A, SCREW TYPE SM SLOTTED RECESS CLASS 2 Fluoro- -78F to 450F -2615 Silicone LOCKING NYLON -61C to 232C -NY ENTER BASIC PELLET Rubber THREAD 2 THREAD SIZE -20F to 400F LOCKING NYLON -5701 Viton A -LY -29C to 204C STRIP X Buna N -65F to 250F LOCKING NYLON -4601 -TP (NBR) -54C to 121C STD. PATCH LENGTH 8 ENTER LENGTH Neoprene HIGH TEMP. -65F to 300F -3701 (EPR) -54C to 149C -HTP LOCKING NYLON O-RING SUFFIX -2701 ENTER FROM TABLE PATCH Ethylene -65F to 300F Propylene -7601 -54C to 149C OPTIONS -BLKOX ENTER FROM TABLE (EPDM) S. GOK 07.02.09 I ADDEDPER DFAR FOR THE SCREW MATERIAL S. GOK H NEW DRAWING FORMAT 01.21.09 CHANGED TABLE, ADDED M2.5, M3.5, M5, M8, M10, M12 G S. GOK 09.09.08 REV. DESCRIPTION DATE MAXIMUM AND MINIMUM MEASURE- ENG. MENTS ARE STATED DIRECTLY ON SEELSKREW PAN HEAD EACH DIMENSION. DWN. J. PALULUMBO 12.16.58 METRIC, SLOTTED CHKD. MAT L: AS NOTED SCALE SM-0000-00-00 APM-HEXSEAL CORPORATION FINISH: AS NOTED THIS DRAWING COVERS PROPRIETARY ITEM AND IS THE PROPERTY OF THE APM-HEXSEAL CORPORATION. THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE WRITTEN APPROVAL OF AN OFFICER OF THE APM-HEXSEAL CORPORATION. TITLE: DWG. NO.