TOL. D LENGTH +0-0.790 UP TO 25.4 +0-1.587 25.4 TO 50.8 O-RING C THREAD SIZE RECOM. CLEAR. C DEPTH TYPICAL CLEARANCE HOLE DETAIL HOLE THREAD SIZE D max min. min. max. min. max. max. 0.127 MAX. M2x0.4 3.94 4.24 1.37 2.31 2.41 0.80 1.20 BREAK SHARP EDGE M2x0.45 5.21 5.56 1.73 2.93 3.03 0.90 1.35 RECOMMENDED M3.5x0.5 5.87 6.22 1.91 3.55 3.65 1.00 1.50 CLEARANCE HOLE DIAMETER M3.5X0.6 7.14 7.52 2.26 3.97 4.10 1.20 1.80 M4x0.7 7.77 8.18 2.44 4.39 4.54 1.40 2.10 M5x0.8 9.20 9.70 3.05 5.56 5.67 1.60 2.40 M6x1.0 12.01 12.50 3.73 6.73 6.83 2.00 3.00 M8x1.25 15.09 15.62 4.52 8.45 8.55 2.50 3.75 DEPTH M10x1.5 18.80 19.69 5.59 10.53 10.64 3.00 4.50 M12x1.75 24.51 25.27 7.11 12.79 12.90 3.50 5.25 STANDARD SPECIFICATIONS & COMMON OPTIONS (HOW TO ORDER) STD. SCREW MATERIAL: TYPE 18/8 STAINLESS STEEL PER DFARS (OTHER MATERIALS AVAILABLE) STD. SCREW FINISH: NATURAL (PASSIVATED PER AMS2700 UNLESS OTHERWISE SPECIFIED) STD. O-RING MATERIAL: SILICONE RUBBER (SEE TABLE FOR O-RING OPTIONS) REACH, RoHS, CMRT, PROP 65 COMPLIANT. AVAILABLE O-RING MATERIALS COMMON OPTIONS SAMPLE CATALOG NO. SM2X8MM-2701-BLKOX SUFFIX DESCRIPTION Compound Service Material Suffix Temp. PAN HEAD WITH BLACK OXIDE PER SCREW TYPE SM -BLKOX MIL-C-13924, CLASS 4 SLOTTED RECESS Silicone -150 F to 500 F -2701 Rubber -101 C to 260 C ENTER BASIC LOCKING NYLON -NY THREAD 2 FluoroSilicone -78 F to 450 F PELLET THREAD SIZE -2615 Rubber -61 C to 232 C LOCKING NYLON X -LY -20 F to 400 F STRIP -5701 Viton A -29 C to 204 C LOCKING NYLON -TP LENGTH 8 ENTER LENGTH Buna N -65 F to 250 F STD. PATCH -4601 (NBR) -54 C to 121 C HIGH TEMP. Neoprene -65 F to 300 F -HTP O-RING SUFFIX -2701 ENTER FROM TABLE -3701 LOCKING NYLON PATCH (EPR) -54 C to 149 C Ethylene -65 F to 300 F OPTIONS -BLKOX ENTER FROM TABLE -7601 Propylene (EPDM) -54 C to 149 C J ECO-18-0018: ADD COLUMN FOR MINIMUM HEAD DIAMETER DWN: DAN LAW CHKD: FJK/LP 01/04/20 01.03.20 I ADDEDPER DFAR FOR THE SCREW MATERIAL S. GOK 07.02.09 H NEW DRAWING FORMAT S. GOK 01.21.09 G CHANGED TABLE, ADDED M2.5, M3.5, M5, M8, M10, M12 S. GOK 09.09.08 REV. DESCRIPTION DATE TOLERANCES TITLE: ENG. UNLESS OTHERWISE NOTED .X 0.1 .XXX 0.005 SEELSKREW, METRIC PAN HEAD DWN. J. PALUMBO 12.16.58 .XX 0.01 1.0 w/ SLOTTED DRIVE FOR RUBBER PORTION ONLY: CHKD. RMAA3 COMMERCIAL SCALE DWG. NO. TOLERANCE: PER ISO 1580 ALL DIMENSIONS IN MILLIMETERS MATERIAL & FINISH: NTS SM-0000-00-00 SEE SPECIFICATIONS & COMMON OPTIONS THIS DRAWING IS THE PROPERTY OF APM HEXSEAL CORPORATION AND INCLUDES PROPRIETARY INFORMATION. THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE WRITTEN APPROVAL OF AN OFFICER OF APM HEXSEAL CORPORATION.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Screws & Fasteners category: Click to view products by APM manufacturer: Other Similar products are found below : 5721-1440-1/4-SS 593503FX 0098.0094 0098.9206 0098.9219 0098.9262 596-2114-013 59781-6 0098.0026 0098.9210 0098.9212 60227- 01 60227-04 60227-08 60687-01 LOCK WASHER Black 62153-11 M316-KSSTMCZ100 M3440-SS M3442-SS M3448-SS 6292-1 6- 306105-9 6-306131-4 690432-1 699161-000 7230-3 7244 7248-1 7248-2 745564-1 F1209 751-00001 7680 809704-1 8700 8860220 9047 9521 992326-6 992763-3 1-18024-0 1-18028-2 A168P1 A495P1 1-24921-1 125416-1 1260 13-0036 1301810148 1301810313