DSC2000 HIGH PERFORMANCE SINGLE PHASE DUAL STAGE POWER LINE FILTER FEATURES Rated currents include 20A Dual Stage Line Filter Available with QD tab, W (wire leads) and S (Studs) option High Performance Design Agency Approved to UL1283 / 60929, CSA C22.2, EN60939 Y-cap value can be adjusted to fit specification ELECTRICAL SCHEMATIC SPECIFICATIONS OPERATING FREQUENCY 50/60Hz USABLE FREQUENCY DC - 400 Hz MAX. OPERATING VOLTAGE 250V +10% AMBIENT TEMPERATURE -25 TO 40C CLIMATIC CATEGORY 25/100/21 TERMINALS (-T) QD: 0.25 TABS W: WIRE LEADS S: STUDS TYP. WEIGHT, LBS (KG) 0.8 (0.36) LEAKAGE CURRENT 250 VAC 50 Hz 0 - 3.20 mA Max. 120 VAC 60 Hz 0 - 1.80 mA Max. HOW TO ORDER HIPOT RATINGS DSC2000- X - Y - Z LINE TO GROUND 2700 VDC Z = TERMINAL (-T) Y = Y-CAP LOAD, NF TYPICAL APPLICATIONS X = Y CAP CENTER, NF Food Service Equipment DSC2000 =FILTER SERIES Industrial and Mechanical Lighting Home Appliances NOTE: USE ANY COMBINATION OF -X WITH ANY -Y CAP VALUES Power Supplies E.G. DSC2000-.47-.47-QD (0.47AMPS WITH 0.47 NF YCAP) Consumer Electronics 1 WWW.ASTRODYNETDI.COM (908) 850-5088 SPECIFICATIONS ARE SUBJECT TO CHANGEDSC2000 HIGH PERFORMANCE SINGLE PHASE DUAL STAGE POWER LINE FILTER TERMINAL OPTIONS MAX. DIMENSIONS (MM) RATED LEAKAGE CURRENT, mA Y-CAP, MODEL NO. CURRENT Z-CAP 250V AC, 50 Hz / (QD)INPUT/ (S) INPUT/ nF WIDTH (LENGTH) HEIGHT (A) 40 C 120V AC, 60 Hz OUTPUT OUTPUT DSC2000-0-0-QD 20 0 0 - - 2.24(57) 4.73(120) 1.81(46) DSC2000-0-0-S 20 0 0 - - 2.24(57) 5.00(127) 1.81(46) DSC2000-.47-.47-QD 20 0.47 0.47 0.15 0.09 2.24(57) 4.73(120) 1.81(46) DSC2000-.47-.47-S 20 0.47 0.47 0.15 0.09 2.24(57) 5.00(127) 1.81(46) DSC2000-1-1-QD 20 1 1 0.31 0.18 2.24(57) 4.73(120) 1.81(46) DSC2000-1-1-S 20 1 1 0.31 0.18 2.24(57) 5.00(127) 1.81(46) DSC2000-2.2-2.2-QD 20 2.2 2.2 0.69 0.40 2.24(57) 4.73(120) 1.81(46) DSC2000-2.2-2.2-S 20 2.2 2.2 0.69 0 .40 2.24(57) 5.00(127) 1.81(46) DSC2000-4.7-4.7-QD 20 4.7 4.7 1.48 0.85 2.24(57) 4.73(120) 1.81(46) DSC2000-4.7-4.7-S 20 4.7 4.7 1.48 0.85 2.24(57) 5.00(127) 1.81(46) DSC2000-10-10-QD 20 10 10 3.14 1.81 2.24(57) 4.73(120) 1.81(46) DSC2000-10-10-S 20 10 10 3.14 1.81 2.24(57) 5.00(127) 1.81(46) DSC2000 MECHANICAL OUTLINES (MM) QD TABS STUDS SERIES ( A ) B C D E F G H I J K L M N 4.56 2.24 1.81 4.09 3.66 2.24 0.94 0.63 1.57 1.28 0.47 0.25x0.20, 2x 0.25, 5x QD TABS N/A (116) (57) (46) (104) (93) (57) (24) (16) (40) (33) (12) , 6.4x5.3, 2x QD, MALE, 6.35, 5x 5.00 2.24 1.81 4.09 3.66 2.24 1.14 0.53 1.67 1.26 0.47 0.26x0.18,2x STUDS STUD, M4, 4x STUD, GND, M4 (127) (57) (46) (104) (93) (57) (29) (14) (43) (32) (12) , 6.8x4.8, 2x TYPICAL TOLERANCE: +/- 0.02 (0.50MM) 2 WWW.ASTRODYNETDI.COM (908) 850-5088 SPECIFICATIONS ARE SUBJECT TO CHANGE