Qi FOD Transmitter Qi Configurable Transmitter for Debug, Verification, and Testing of Qi Receivers APPLICATION Product developers looking to quickly characterize and debug wireless power receiver functionality and foreign object detection (FOD) performance. The FOD Transmitter accurately measures and reports transmitted power (PPT) and system power loss (Ploss). The transmitter is useful for design debugging, characterization, Qi pre-compliance testing, and production testing. FEATURES Fully functional Qi low power transmitter that emulates TPT 2 Stand alone, easy to use device mounted in plastic frame The Qi FOD Transmitter is a +19VDC +/-1V power input (AC adapter included) low power transmitter that can be used to test the operation and LEDs for device status performance of Qi receiver USB/serial port for displaying PPT, PPR, Ploss, and other parameters devices. A USB serial port Uses same coil as FOD test transmitter TPT 2 specified by WPC. Coil is provides the user interface for mounted to the side in the plastic frame to minimize parasitic losses displaying operational Factory calibrated and characterized using AudioDev CATS Calibrator parameters and for programming Accurately measures and reports PPT to meet WPC requirements transmitted power offsets and Decodes standard 8-bit WPC received power (PPR) packets operating modes. Decodes high res 16-bit received power packets sent by AVID Qi Receiver Simulator V1.1 and AVID FOD Receiver devices Programmable PPT offset and FOD threshold values (serial commands) For a quotation or for technical Open loop (fixed frequency) mode for characterizing receivers and for inquiries please contact: checking TX accuracy using AudioDev CATS calibrator wirelesspower avid-tech.com Position mode (ping loop) for easy center alignment of receivers Visit AVIDs wireless power forum: www.avid-tech.com/wirelesspower TEST MODES Standard Qi V1.1 compatible transmitter with USB serial port Open loop mode (fixed frequency operation) Specifications Position Mode (ping loop for using signal strength to center RX) Subject to Change PPT OFFSET AND FOD THRESHOLD Selectable PPT offset (+/-1000mW max, 1.0mW steps) Selectable FOD trip threshold (0 to 30000mW, 1.0mW steps) Enable or Disable transmitter shutdown after trip events or timeout 2112 Case Parkway South, Twinsburg, Ohio 44087 Phone 330.487.0770 800.285.AVID Fax 330.487.0777 www.avid-tech.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for avn engineering manufacturer: Other Similar products are found below : AES-KCU-JESD-G 102-03 AES-MINI-ITX-7Z045-BAS-G AES-ATT-M14A2A-IOT-SK-AWS-G 105-01 105-011 103-01 102-02 103-02 AES-MINI-ITX-7Z100-G 101-03 AES-ATT-M18Q2FG-SK-G AES-SLP-12V5A-G AVTSE-RPI-IIOTG AES-FMC-MC4-AR0231AT-G AES-LPA-502-G AES-Z7MB-7Z010-SBC-I-G AES-MINI-ITX-7Z045-SYS-G AES-ZU-IOCC-G AES-FM-S14 AES-FXA120W-F-M400 AES-A7MB-7A35T-G AES-CAM-ON-P1300C-G AES-ULTRA96-V2-I-G AES-FMC-ISMNET2-G L02-027-1000-Z-ZZZZ V2 AES-S32V- NXP-G AES-MBCC-IO-G AES-PMOD-TPM20-SLB9670-G AES-MMP-BB2-G AES-BG96-IOT-SK2-PROMO VT-SK-002-A01 AES- ATT-IMA3-IOT-STM32L4-SK-G AES-ACC-U96-ME-MEZ AES-ZBDB-ADPT-G AES-Z7EV-7Z020-G AES-MINI-ITX-7Z045-G-466 AES-SHLD-BLEWF-G AES-PMOD-MUR-1DX-G AES-ACC-MAAX-CAM1 AES-ACC-U96-PHS-1 AES-FMC-HDMI-CAM-G AES- ARDUINO-CC-G AES-MBCC-FMC-G AES-FMC-EXT-G AES-ATT-M18Q-CAR-G AES-VTSK001 AES-FMC-MULTICAM4-G AES- MC-SBC-IMX8M-G AES-FMC-NETW1-G