AT&T IoT Starter Kit 2nd generation KIT DESCRIPTION AT&T IoT Starter Kit (2nd Generation) provides an innovative new System-on- Module IoT solution, enabling the design of cellular connected edge devices, certified for operation in the United States. Powered by AT&T IoT services available through Avnet, this kit provides a complete development environment for sensor-to-cloud applications and services. Designed to be used for both prototyping and production, the slim form- factor LTE system board is fully compliant with FCC, PTCRB, and AT&T network certifications, thereby reducing development risk and speeding IoT deployments. The Starter Kit features a small (79.5 mm x 30 mm) development board built around Wistron NeWeb Corporation (WNC) M18Q2FG-1 LTE Cat-4 modem module. The M18Q2FG-1 module provides cellular modem functionality plus user application code support via a dedicated Arm Cortex-A7 processor, thus eliminating the need for an external host processor. A rich set of embedded system peripherals, controllable through the users application code, are easily accessible through a 60-pin expansion connector or a 2x6 peripheral module header. This enables easy system customization with application specific sensors and I/O interfaces through the addition of user created or off-the-shelf plug-in boards. The development board also includes an ambient light sensor, temperature sensor, and 3-axis accelerometer for out-of-box demonstration examples. User application code runs directly on the M18Q2FG-1 module, leveraging the KIT INCLUDES OpenEmbedded software framework for Linux application development. A - LTE Development Board Software Development Kit (SDK) specific to the M18Q2FG-1 module provides - LTE and LTE+GNSS Antennas the necessary API calls to access hardware peripherals and system resources. - SIM Card Application code built with the SDK is loaded into the M18Q2FG-1 module - USB Cable through a USB interface on the development board, eliminating the need for - Power Supply (AC to 5V DC) external proprietary JTAG cables. AT&T services facilitate Cloud based application development and deployment: TARGET APPLICATIONS M2X - a cloud-based, fully managed IoT device management and time-series - Cellular IoT Devices data storage service for network connected devices, and Flow Designer - a visual - Remote Access IoT application development and data orchestration environment, with run-time support for complex nonstandard protocol translation, data processing and - Smart City integrations, to help developers create IoT applications fast. - Smart Agriculture - Asset Tracking FEATURE LIST - Building Automation Development Board - Factory Automation - North America SoC Module (M18Q2FG-1) - Ambient Light Sensor To purchase this kit, visit - Temperature Sensor BLOCK DIAGRAM FEATURED SUPPLIERS PARTS Part Number Description AES-ATT-M18Q2FG-SK-G AT&T IoT Starter Kit (2nd Generation) RELATED PARTS Part Number Description AES-ATT-M18Q2FG-M1-G North America LTE M18Q2FG-1 Production Board (M1) AES-ATT-M18Q-CAR-G LTE IoT Breakout Carrier (Click Module expansion board for system-level prototyping) W3906B0100 LTE + GNSS Antenna (certified) W3907B0100 LTE Antenna (certified) W6113B0100 LTE+GNSS MIMO Combo Antenna ASP-197278-01 Samtec ERM8 Series Matching Connector (7mm mated connector height) ASP-197278-02 Samtec ERM8 Series Matching Connector (10mm mated connector height) ASP-197278-04 Samtec ERM8 Series Matching Connector (14mm mated connector height) Americas CONTACT 2211 South 47th Street INFORMATION Phoenix, Arizona 85034 United States of America eval.kits avnet.com 1-800-585-1602 Avnet th Street 2211 S. 47 Phoenix, AZ 85034 Copyright 2017 Avnet, Inc. AVNET, Reach Further, and the AV logo are registered trademarks of Avnet, Inc. 1-800-332-8638 All other brands are the property of their respective owners. C1244r201712 avnet.com