Data Sheet Programmable AC Power Sources 9800/B Series Features n 0 to 300 V, low distortion AC power source USB RS232 LAN GPIB (select models) with models delivering a maximum of 1500 VA, 12 Arms / 36 Apeak The 9800/B Series is both a programmable List mode can be used to generate sequences of n Output frequency adjustable from AC source and measurement tool. These fully waveforms such as surges, sags, and frequency 45 Hz to 500 Hz programmable linear AC sources deliver a disturbances. The programmed list can be n Select 150 V / 300 V autoranging or 300 V maximum of 1500 VA through the universal line triggered from the front panel or via BNC range operation for continuous sweep from output terminals on the front and the output connector on the rear. 0 to 300 V connector on the rear. The output can be varied n Displays Vrms, Irms, Ipeak, frequency, PF, from 0 to 300 V with 0.1 V programming Standard USB, RS232, and LAN interfaces can resolution. The output frequency can also be be used to remotely control the source via a PC. apparent power, true power, and elapsed adjusted from 45 Hz to 500 Hz with start and GPIB is available as an option for select models. output time TM stop phase angle from 0 to 360 degrees. The Free application software and LabVIEW driver n Adjustable phase angle control bright VFD display shows Vrms, Irms, Ipeak, are available to reduce programming time and frequency, power factor (PF), apparent power, increase productivity. n Programmable voltage and frequency limit true power, and elapsed output time. settings n Built-in PLD and dimmer simulation These AC sources provide a power line Common applications disturbance (PLD) simulator, list mode, and n Voltage and frequency sweep mode The 9800/B Series AC power sources are sweep mode for simulation of common power suitable for evaluating transformers, TRIACs, n List mode: 10 user-defined programs with up grid faults and disturbances. A built-in dimmer SCRs and passive components as well as to 100 programmable steps each function is also available for testing motors and production, R&D, service, and pre-compliance LEDs. n BNC I/O for external triggering, output status testing. indication/control, and synchronization n Save and recall up to 100 instrument settings Model 9801 9803/B* 9805/B* n USB (USBTMC)-compliant, RS232, and LAN Voltage (rms) 0 to 300 V interfaces standard Max. Power 300 VA 750 VA 1500 VA n GPIB optional on select models I/O Interface USB, RS232, LAN USB, RS232, LAN, GPIB (optional) n OVP/OCP/OPP/OTP protection modes and key *Model numbers with suffix B (980xB) do not include a GPIB interface. See ordering information on page 5 for details. lock function n Pre-compliance testing for voltage dips and frequency simulations according to IEC61000-4-11 / 4-14 / 4-28 TM n LabVIEW driver and softpanel for remote control available Technical data subject to change bkprecision.com B&K Precision Corp. 2021Programmable AC Power Sources 9800/B Series Flexible operation List mode List mode supports the generation of more complex sequences with varying times, amplitudes, and frequencies. Up to 100 steps in 10 groups can be saved and executed. This allows the user to build a wide range of waveforms in a sequence to simulate grid faults and disturbances. The programmed list can be triggered from the front panel or via BNC connector on the rear. List Mode Steps Power line disturbance (PLD) simulator The PLD simulator is an extended feature of list mode that provides the user with more control over the disturbance insertion into the waveform. This can be useful for evaluating a products immunity performance. For instance, a user could produce common waveform disturbances like surge, sag, spikes, and dropouts at user-defined locations on the waveform. PLD Waveforms 2 bkprecision.com