BB-WSD2C21150 BB-WSD2C06010 BB-WSD2C31010 BB-WSD2M06010 BB-WSD2M31010 Wzzard Mesh Wireless Sensors BB-WSD2M3101P2K for Industrial Applications BB-WSD2M3101R100 PRODUCT FEATURES + Ultra-low power 802.15.4e SmartMesh IP technology + Communicates with SmartSwarm-342 gateway via scalable and reliable wireless mesh networks + Connect to most any industry standard sensors + Rugged, IP67 rated, fiber reinforced polyester PBT enclosure + MQTT and JSON IoT protocol to application platform + Sensor interface cable and antenna included + UL Listed C1/D2 for hazardous locations (conduit models only) Wireless Connectivity Where You Need It SPECIFICATIONS The Wzzard intelligent wireless sensor platform creates a complete, quick POWER and easy connectivity stack between your sensors and application on your Internal (2) 3.6V 2400 mAH Lithium Thionyl Chloride AA Batteries network or the Internet. The platform uses Wzzard mesh sensor edge nodes Battery Life >5 years based on 1 min. sensor sampling and reporting and a wireless 802.15.4e SmartMesh IP network to transmit sensor data to Optional External a SmartSwarm Gateway. The gateway can connect to the Internet via wired 10-30 VDC 40mA peak Input Voltage connections or cellular data networks and communicate with application SENSOR POWER OUT platforms using the MQTT IoT protocol and JSON data formats. Switched Vbat Battery Power Turned on at time of measurement (20 mA max) Switched Vref 3.3V (+/- 0.1%) Turned on at time of measurement (20 mA max) Wzzard mesh wireless sensor nodes can accommodate virtually any MECHANICAL industry-standard external sensors. Connections can be made via M12 Conduit (UL Type 3 outdoor approved): 12.7mm (0.5 in) connector or conduit fitting. The nodes provide a wide variety of sensor - includes (1) one sensor interface cable - 8-pin 26-gauge wire Connection Options interface options, including general purpose analog input, digital input/output harness, 1.8 m (6 ft) (Model BB-WSCACO-6) and thermocouple. All nodes contain an internal temperature sensor. M12 connector (Not UL rated for outdoor installations.) Analog Input (0 -10 VDC, 0 - 20 mA, 4 - 20 mA) Secure, Reliable and Highly Scalable Wireless Networking Digital Input (0 - 48 VDC) The 802.15.4e Wzzard platform uses mesh networking and time- Digital Input Frequency 1-1K Hz (accuracy +/- 1 Hz) synchronized channel hopping to provide up to 99.999% connectivity, even Sensors Digital Input Counter in the most demanding RF environments. New nodes may be added at any Integrated Temperature time and the SmartMesh IP network will dynamically self-configure as new Thermocouple (J, K, N, R, S, T, B, E) nodes are added or removed. Digital Output, Sinking, up to 100mA 30VDC RP-SMA, Omni-directional, 3.8 dBi, 2.4 GHz (included) External Antenna Easy Configuration and Installation (included) Dimensions: 194 mm (7.64 in) Configuration of the Wzzard sensor platform is easy via the SmartSwarm (4) Mounting Ears, M5 ( 10) screws (UL approved option) Gateway. Nodes can be configured with scaling information, eng. units, Magnetic Mounting (via internal enclosure magnet) Mounting Options friendly names, geo-location and other descriptive information. Pull Force 2.13 kg (4.7 lb) Note: Magnetic mounting (all models) not rated for UL installations. Enclosure IP67 rated fiber reinforced polyester PBT The platform simplifies physical installation, too. Nodes can be attached to Weight 0.34 kg (0.75 lb) any surface via mounting ear flanges and screws or the embedded magnetic TECHNOLOGY base. Magnetic mount is convenient for RF link location determination or other purposes. (Permanent use of the magnetic mount is not approved for Wireless 802.15.4e, SmartMesh IP UL installations.) The IP67 rated, fiber reinforced polyester PBT housing Protocols MQTT, JSON makes the units deployable in any industrial or commercial environment. LED Network Connectivity ENVIRONMENTAL Intelligence at the Network Edge Indoor/Outdoor Installation Note: M12 models are rated for outdoor use (except in UL installations). The Wzzard wireless platform places intelligence at the network edge. The Operating Temperature -40 to +80 C (-40 to +176 F) Wzzard mesh wireless sensor nodes can be configured to communicate data Storage Temperature -40 to +85 C (-40 to +185 F) only when specified threshold or alert levels are exceeded. When reporting, Operating Humidity 0 to 95% Non-condensing they can associate useful information like geo-location, device name and uptime. This eliminates unnecessary network traffic, eases the processing WIRELESS SECURITY burden on upstream resources and cuts the cost of cellular data plans when Device Authentication the gateway is using the cellular data network. Thanks to low-power wireless 128-bit, AES-based Encryption with multiple keys technology and programmable time synchronization, the Wzzard mesh Message Integrity Check (MIC) wireless sensor nodes can operate for many years on battery power. Synchronized Key Changeovers Customized Key Rotation All product specifications are subject to change without notice. BB-WSD2x WzzardIndustrialSensorNodes 3021dsBB-WSD2C21150 BB-WSD2C06010 BB-WSD2C31010 BB-WSD2M06010 BB-WSD2M31010 BB-WSD2M3101P2K BB-WSD2M3101R100 ORDERING INFORMATION MODEL NUMBER DESCRIPTION CONNECTOR INCLUDES UL LISTED C1/D2 2 Analog Inputs, 1 Digital Input, 1 Digital Output, 2 Thermocouples, Indoor / Outdoor, BB-WSD2C21150 Industrial Cooler/HVAC Node Conduit 2 Thermistors, Internal Temperature w/ mounting ear installation Indoor / Outdoor, BB-WSD2C06010 Industrial Digital Input Node Conduit 6 Digital Inputs, Internal Temperature w/ mounting ear installation Indoor / Outdoor, BB-WSD2C31010 Industrial Power Monitor Node Conduit 3 Analog Inputs, 1 Digital Input, Internal Temperature w/ mounting ear installation BB-WSD2M06010 Industrial Digital Input Node M12 6 Digital Inputs, Internal Temperature No (M12 connector not UL.) BB-WSD2M31010 Industrial Power Monitor Node M12 3 Analog Inputs, 1 Digital Input, Internal Temperature No (M12 connector not UL.) 2 Analog Inputs, Vbat measurement, 1 Digital Input, Internal Temperature, BB-WSD2M3101P2K Industrial Power Monitor Node M12 No (M12 connector not UL.) Switched Vbat Power Out (2 sec.) 2 Analog Inputs, Vref measurement, 1 Digital Input, Internal Temperature, BB-WSD2M3101R100 Industrial Power Monitor Node M12 No (M12 connector not UL.) Switched 3.3V Power Out (100 ms) - ACCESSORIES sold separately MODEL NUMBER DESCRIPTION COMPATIBLE NODES Antenna - dipole, 2.4/5 GHz, 2dBi, RPSMA, rubber duck, hinged BB-ACH2-DBAT-DP002 All Industrial Nodes (Replacement 1 included with all nodes.) BB-ZXTMT Kit - Zlinx Xtreme conduit cable gland & hub All Conduit Nodes Sensor interface cable, 8-pin 26-gauge wire harness, 1.8m (6ft) BB-WSCACO-6 All Conduit Nodes (Replacement 1 included with conduit nodes.) BB-WSCAM12-6 Cable - M12 pigtail, 8-pin, 1.8 m (6 ft) All M12 Nodes BB-JC10F50-V Sensor - 50A clamp-on AC current, 0-5VDC Out All Analog Input Nodes BB-JC24S250-V Sensor - 250A clamp-on AC current, 0-5VDC Out All Analog Input Nodes BB-JC36S500-V Sensor - 500A clamp-on AC current, 0-5VDC Out All Analog Input Nodes BB-WCD-TM2M Thermistor cable BB-WSD2C21150 BB-WTJ-10-36-TT Sensor - J-type thermocouple, 10 mounting hole, ungrounded BB-WSD2C21150 BB-HS-104T2505402 Sensor - low power vibration/temperature sensor, 250mV/g BB-WSD2M3101P2K BB-WSDCBL-ACL-2 M12 signal conditioning cable for model BB-HS-104T2505402 BB-WSD2M3101P2K BB-T9602-3-A-1-G2 Sensor cable - temperature/humidity, 1.8 m (6 ft) BB-WSD2M3101R100 MECHANICAL DIAGRAM Units = Millimeters Inches