74001E.01305 Belden

code TECHNICAL DTATSHEET 74001E version 6 2 Date 2016-03-10 4 PR CAT5E SF/UTP 24AWG PVC page 1/3 STANDARDS ISO/IEC 11801 2nd edition (September 2002) and ISO/IEC 24702 EN 50173 1 (November 2002). TIA/EIA-568-B.2 (May 2001). UL AWM 2464 CABLE CONSTRUCTION Conductor Material Solid bare copper ETP Diameter AWG 24 Insulation Material Polypropylene Diameter over insulated conductor 1.1 0.05 mm Pair Pair 2 twisted insulated conductors, non bonded Number of pairs 4, all twisted together Colour code pair 1 White / Blue & Blue Colour code pair 2 White / Orange & Orange Colour code pair 3 White / Green & Green Colour code pair 4 White / Brown & Brown Insulating foil Material Polyester Shielding foil Material Laminated Aluminium / Polyester Position aluminium Outside Braid Material Solid tinned copper Coverage minimum. 80 % Sheath: Material PVC Diameter 7.0 +/- 0.2 mm wallthickness 0.8 mm Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner . code TECHNICAL DTATSHEET 74001E version 6 2 Date 2016-03-10 4 PR CAT5E SF/UTP 24AWG PVC page 2/3 Colour Black ELECTRICAL CHARACTERISTICS Low frequency and D.C. D.C. resistance conductor < 93.8 /km D.C. loop resistance < 19.0 /100m Resistance unbalance < 2 % D.C. insulation resistance > 5000 M.km Dielectric strength cond. cond. (2 sec.) 2.5 kV D.C. Mutual capacitance < 56 nF/km Capacitance unbalance < 1600 pF/km High frequency ((Limits below 4MHz are for information only except for RL) Velocity of propagation 4 100 MHz 0.6 c Skew 1 100 MHz 40 ns/100m Propagation delay 1 100 MHz 534 + 36/Vf ns/100m Longitudinal attenuation 4 100 MHz 1.9108*Vf+0.0222*f+0.2/Vf dB Transverse conversion loss (TCL) 1 100 MHz 40-10log(f) dB Equal level transverse conversion loss (ELTCL) 1 30 MHz > 35 20 log (f) dB Near end cross talk (NEXT) 1 100 MHz 65.3-15xlog(f) dB Power sum near end cross talk (PSNEXT) 1 100 MHz 62.3-15xlog(f) dB Equal level far end cross talk (ELFEXT) 1 100 MHz 64.0-20xlog(f) dB Power sum equal level far end cross talk (PSELFEXT) 1 100 MHz 61.0-20xlog(f) dB Attenuation cross talk ratio (ACR) 4 100 MHz 65.3-15xlog(f)-(1.9108*Vf+0.0222*f+0.2/Vf) dB Power sum attenuation cross talk ratio (PSACR) 4 100 MHz 62.3-15xlog(f)-(1.9108*Vf+0.0222*f+0.2/Vf) dB Input impedance open/short (Zo/s) 4-100 MHz 100 15 Mean characteristic impedance (Zcm) 100 MHz 100 5 Return Loss (RL) 4 f 10 MHz 20 + 5 log (f) dB 10 f 20 MHz 25 dB Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner .