The ABC225 Series of open-frame power supplies, with its wide universal 90-264 VAC input range and high power density, is available at 225 W of output power and a variety of single and multiple output voltages. The high efficiency and high power density of the ABC family ensures minimal power loss in end- use equipment, thereby facilitating higher reliability, easier thermal management and meets regulatory approvals for environmentally-friendly end products. These power supplies are ideal for telecom, datacom, industrial equipment and 2 x 4 x 1 Inches Form Factor other applications. 225 Watts with Forced Air Cooling & 112.5 Watts with Convection Cooling Efficiencies up to 94% Instrumentation Lighting -40 to 70 degree operating temperature Industrial Applications 12 V Fan Output, Thermal Shut-Down feature Applied Computing Renewable Energy 300 k Hours MTBF Test and Measurement Robotics Standby Power <0.5 W Wireless Communication CE marked North America +1-866.513.2839 Asia-Pacific +86.755.29885888 Europe, Middle East +353 61 225 977 Bel Power Solutions tech.support psbel.com 152 North 3rd Street, Suite 805 San Jose, CA 95112 USA 2014 Bel Power Solutions, inc. BCD.00554 001 ABC225 Series MODEL MAX. LOAD MAX. LOAD RIPPLE & DESCRIPTION VOLTAGE MIN. LOAD 1 NUMBER (CONVECTION) (13 CFM) NOISE Screw Terminal ABC225-1T12L 12 V 9.37 A 18.75 A 0.0 A 1% Molex Connector ABC225-1012L ABC225-1T15L Screw Terminal 15 V 7.5 A 15 A 0.0 A 1% Molex Connector ABC225-1015L ABC225-1T24L Screw Terminal 24 V 4.68 A 9.37 A 0.0 A 1% Molex Connector ABC225-1024L ABC225-1T30L Screw Terminal 30 V 3.75 A 7.5 A 0.0 A 1% ABC225-1030L Molex Connector Screw Terminal ABC225-1T48L 48 V 2.34 A 4.68 A 0.0 A 1% ABC225-1048L Molex Connector Screw Terminal ABC225-1T58L 58 V 1.94 A 3.88 A 0.0 A 1% ABC225-1058L Molex Connector ABC225-CK metal cover kit accessory NOTES: 1. Ripple is peak to peak with 20 MHz bandwidth and 10 F (Tantalum capacitor) in parallel with a 0.1 F capacitor at rated line voltage and load ranges. 2. Combined output power of main output, fan supply shall not exceed max. power rating. 3. Fan supply output voltage tolerance including set point accuracy, line and load regulation is +/-10% and ripple and noise is less than 10%. 866.513.2839 tech.support psbel.com 2014 Bel Power Solutions, inc. BCD.00554 001