The ABC40 Series of open-frame power supplies, with its wide universal 90 264 VAC input range and high power density, is available at 40 W of output power and a variety of single and multiple output voltages. The high efficiency and high power density of the ABC family ensures minimal power loss in end-use equipment, thereby facilitating higher reliability, easier thermal management and meets regulatory approvals for environmentally-friendly end products. These power supplies are ideal for telecom, datacom, industrial equipment and other applications. Key Features & Benefits 4 x 2 x 1.2 Inch Form Factor 40 W convection-cooled rating Single to Triple Outputs High Efficiency > 85% Low conducted and radiated noise No Load Power < 0.3 W IEC / EN / UL 62368-1 compliant IEC Protection Class Options: o Class I: Earth pin J4 (no suffix) o Class II: No Earth pin (-2 suffix) RoHS Compliant Cover Kit Accessory Available Applications Lighting Automation Controls Industrial Processing Robotics Applied Computing Wireless Communication Instrumentation Test and Measurement 2 ABC40 Series 1. MODEL SELECTION 1 2 3 4 MODEL VOLTAGE MAX LOAD MIN LOAD RIPPLE POWER ABC40-1005G 5.1 V 8.0 A 0.0 A 1% 40 W ABC40-1012G 12 V 3.5 A 0.0 A 1% 40 W ABC40-1015G 15 V 2.7 A 0.0 A 1% 40 W ABC40-1024G 24 V 1.7 A 0.0 A 1% 40 W ABC40-1048G 48 V 0.83 A 0.0 A 1% 40 W V = 5.2 V 6.0 A 0.5 A 1.5% 1 ABC40-3000G V = 12.5 V 2.0 A 0.1 A 1% 40 W 2 V = -12.8 V 0.5 A 0.0 A 1% 3 V = 5.2 V 6.0 A 0.5 A 1.5% 1 ABC40-3001G V = 24 V 1.0 A 0.1 A 1% 40 W 2 V = -12.8 V 0.5 A 0.0 A 1% 3 V = 5.2 V 6.0 A 0.5 A 1.5% 1 ABC40-3002G V = 15 V 1.5 A 0.1 A 1% 40 W 2 V = -15 V 0.5 A 0.0 A 1% 3 V = 3.3 V 6.0 A 1.0 A 1.5% 1 ABC40-3003G V = 5 V 3.0 A 0.1 A 1.5% 40 W 2 V = -12.8 V 0.5 A 0.0 A 1% 3 5 COVER-40-XBC Metal cover kit accessory 1 Class II version available. Add suffix -2 at the end of the Model Number 2 Maximum current per output channel. Do not exceed total output power rating. 3 Min Load specified to meet cross regulation. 4 Ripple is peak to peak with 20 MHz bandwidth and 10 F (Electrolytic capacitor) in parallel with a 0.1 F capacitor at rated line voltage and load ranges. 5 When used in Cover Kit, de-rate output power to 70 % under all operating conditions. 2. INPUT SPECIFICATIONS Specifications are for nominal input voltage, 25C unless otherwise stated. PARAMETER DESCRIPTION / CONDITION SPECIFICATION Input Voltage Universal 90 - 264 VAC 6 Input Frequency 47 to 400 Hz 120 VAC: 0.85 A max. Input Current 230 VAC: 0.45 A max. Single output models < 0.3 W No Load Power Multi output models < 0.5 W 120 VAC: 30 A max. Inrush Current 230 VAC: 60 A max. 120 VAC: < 500 A Leakage Current 230 VAC: <1000 A Switching Frequency Typical 67 67 kHz 6 Safety approved: 47 to 63 Hz tech.support psbel.com