DATA SHEET DP7007G 7A DC-DC Intelligent dPOL Input voltage range: 8V 14V Output voltage range: 0.7V 5.5V at 0 - 7A. Programmable dynamic output voltage positioning for better load transient response Choice of 500KHz switching for highest efficiency or 1MHz for lowest ripple noise. FEATURES Flexible Fault Response features Multiple turn-on/off slew rates and delays Digital Filter Compensation Synchronous operation with other supplies Real time performance monitoring GUI based configuration for short development time. Small footprint SMT package: 12.5 x 22.2 mm. UL 60950-1/CSA 22.2 No. 60950-1-07 Second Edition, IEC 60950-1: 2005, and EN 60950-1:2006 (pending). DESCRIPTION Power-Ones DP7007G is an intelligent, fully programmable step-down point-of-load DC-DC converter integrating digital power conversion and intelligent power management. It works with the DM7300 Series Digital Power Managers (DPM) which provides for synchronizing all system Power-On-Load regulators, for an elegant, flexible, low noise power system solution. All key parameters, sequencing, tracking, fault protection, and compensation parameters of the DP7007G are programmable via 2 Power-One s I C based GUI. All settings can be changed by a user at any time during product development and service. Once programmed, the DPM remembers all settings and configures the DP7007G through a self-clocking single wire communication bus. FLASH memory in the DPM allows changes to be made without the need to solder or rewire the regulator. BCD.00255 AA October-9-2013 1 www.power-one.com DATA SHEET 1 ORDERING INFORMATION DP 70 07 G zz 1 RoHS compliance: Packaging Option Product Series: Output R100 - 100pc T&R family: Intelligent dPOL Current: Dash G - RoHS compliant for all six R200 200pc T&R d-pwer Converter 7A substances Sample quantity orders have no suffix. Example: DP7007G-R200: A 200-piece reel of RoHS compliant dPOL converters. Each dPOL converter is labelled DP7007G. Reference Documents DM7300 Digital Power Manager Data Sheet DM7300 Digital Power Manager Programming Manual 2 Power-One I C Graphical User Interface 2 DM00056-KIT USB to I C Adapter Kit. User Manual 2 ABSOLUTE MAXIMUM RATINGS Stresses in excess of the absolute maximum ratings may cause performance degradation, adversely affect long term reliability, and cause permanent damage to the converter. PARAMETER CONDITIONS/DESCRIPTION MIN MAX UNITS Inductor or Printed Circuit Board Input Voltage applied -40 125 C (PCB) Temperature Input Voltage 250ms Transient 15 VDC Output Current (See Output Current De-rating Curves) -6 7 ADC 3 ELECTRICAL SPECIFICATIONS Specifications apply at the input voltage from 8V to 14V, output load from 0 to 7A, ambient temperature from -40 C to 85 C. Test conditions include an output filter with 2 x 330 F 20m solid electrolytic, plus 1 x 22 F X7R ceramic output capacitors, unless otherwise noted. 3.1 INPUT SPECIFICATIONS PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS Input voltage (V ) 8 14 VDC IN Input Current (at no load) V =14.0V, V =3.3V 50 mADC IN OUT Ramping Up 7.5 VDC Undervoltage Lockout 5 Ramping Down VDC Current drawn from the external low voltage VLDO Input Current 50 mADC supply at VLDO=8V 1 Packaging option is used only for ordering and not included in the part number printed on the dPOL converter label. DP7007G 7A DC-DC Intelligent dPOL 2 www.power-one.com