The FNP300 Series provides highly-efficient AC-DC power supplies, each with one high current output and an additional standby output, which can be used in a wide range of applications. Passive current share along with internal ORing diodes allow the FNP300 to be used in redundant, hot-swap applications. All models meet international safety standards and display the CE Mark for the low Voltage RoHS lead free solder and lead solder exempted Directive. products are available Wide input voltage range 85-264 VAC Two outputs (one high current output) Low conducted and radiated EMI (EN 55022 class B) Safety approved to UL/CSA60950-1, EN60950-1 and IEC60950-1 Telecommunication Equipment High density design 4 x 1.58 x 8.5 cassette Highly-efficient topology 2 I C interface Overtemperature, output overvoltage, and output overcurrent protection Supervisory signaling Included ORing diode for true redundant operation North America +1-866.513.2839 Asia-Pacific +86.755.29885888 Europe, Middle East +353 61 225 977 tech.support psbel.com 2015 Bel Power Solutions, Inc. BCD20015-G AD FNP300 Series OUTPUT 1 OUTPUT 2 INPUT VOLTAGE RATED POWER MODEL V I V I O NOM O MAX O NOM O MAX VAC W VDC ADC VDC ADC FNP300-1012G 85-264 12 25 12 0.7 310 FNP300-1024G 85-264 24 12.5 12 0.7 310 FNP300-1048G 85-264 48 6.25 12 0.7 310 OPTIONS SUFFIXES TO ADD TO PART NUMBER RoHS lead solder exemption No RoHS character required. RoHS compliant for all 6 substances Add as the last character of the part number. Stresses in excess of the absolute maximum ratings may cause performance degradation, adversely affect long-term reliability, and cause permanent damage to the converter. PARAMETER CONDITIONS/DESCRIPTION MIN MAX UNITS Continuous 264 VAC Input Voltage Transient, 60 ms 300 VAC Operating Temperature Ambient Vi min-Vi max, Io nom, cooling by internal fan 0 55 C Storage Temperature Non-operational -40 85 C The electric strength test is performed in the factory as routine test in accordance with EN 550116, IEC/EN 60950, and UL 1950 and should not be repeated in the field. Bel Power Solutions will not honor any warranty claims resulting from electric strength field tests. PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS Input/Case Basic Insulation Safety Rating Input/Output Reinforced Output/Case Functional Input/Case 2121 Electric Strength Test Voltage Input/Output 4242 VDC Output/Case 500 All specifications apply over specified input voltage, output load, and temperature range, unless otherwise noted. PARAMETER DESCRIPTION CRITERION Electrostatic Discharge IEC/EN 61000-4-2, level 4 (contact/air) 8/15 kV, criterion B Electromagnetic Field IEC/EN 61000-4-3, level 3 10 V/m, criterion A Electrical Fast Transients / Burst IEC/EN 61000-4-4, level 4 (direct/capacitive) 2/1 kV, criterion B Surge IEC/EN 61000-4-5, level 3 (L/L, L/C) 1/2 kV, criterion B Voltage Dips and Interruptions IEC/EN 61000-4-11 Criterion B RF Conducted Immunity IEC/EN 61000-4-6 10 VAC, AM 80%, 1 kHz, criterion A Emissions Radiated/Conducted CISPR 22/EN 55022/EN 61204 Class B Harmonics IEC/EN 61000-3-2 Class B Voltage Fluctuation and Flicker IEC/EN 61000-3-3 Pass 866.513.2839 tech.support psbel.com 2015 Bel Power Solutions, Inc. BCD20015-G AD