MAP130-4003 Bel Fuse

Bel Power Solutions MAP130 Series of single and multiple output power supplies provide fully-regulated outputs with high peak current capabilities in a compact 4.5 x 8.5 x 2.0 inch U-channel chassis. Other standard features include auto select AC input, EMI level B filtering, power fail, thermal shutdown (with warning), remote sense, and metric and SAE mounting inserts. This convection-cooled series is designed for use in commercial and industrial environments in temperatures up to 50C. All products are approved to the latest international regulatory standards and display the CE Mark. RoHS Compliant Automatic 115/230 Input Voltage Selection All Outputs Fully Regulated Remote Sense, Overvoltage Protection and Overtemperature Protection Power Fail Signal Included Greater than 100,000 Hour MTBF U-Channel Chassis: 8.5 x 4.5 x 2.0 inch (215.9 x 114.3 x 50.8 mm) Optional Cover Metric and SAE Mounting Inserts 2 MAP130 Series RIPPLE OUTPUT ADJUSTMENT CONTINUOUS PEAK LINE LOAD INITIAL SETTING 6 MODEL & 1 VOLTAGE RANGE CURRENT CURRENT REGULATION REGULATION ACCURACY 2 NOISE MAP130-1005G 5V 4.75V to 5.50V 26A 30A 0.2% 1% 1% 5.1V to 5.2V 3 3 MAP130-1012G 12/15V 11.4V to 15.75V 12A/10A 13.8A/11A 0.2% 1% 1% 12.0V to 12.2V 3 3 MAP130-1024G 24V/28V 22.5V to 30.0V 6.25A/5.4A 6.8A/5.9A 0.2% 1% 1% 23.9V to 24.1V OUTPUT ADJUSTMENT OUTPUT PEAK LOAD RIPPLE & INITIAL SETTING 6 MODEL LINE REGULATION 4 5 VOLTAGE RANGE CURRENT CURRENT REGULATION NOISE ACCURACY +5V 4.75V to 5.50V 20A 30A 0.2% 1% 1% 5.1V to 5.2V +12V 11.5V to 12.5V 5A 10A 0.5% 2% 1% 11.75V to 12.0V MAP130-4000G -5V Fixed 1A 1A 0.5% 2% 1% -4.8V to -5.2V -12V Fixed 1A 1A 0.5% 2% 1% -11.6V to -12.4V +5V 4.75V to 5.50V 20A 30A 0.2% 1% 1% 5.1V to 5.2V +24V 23.0V to 25.0V 3.5A 5A 0.5% 2% 1% 23.9V to 24.1V MAP130-4001G -12V Fixed 1A 1A 0.5% 2% 1% -11.6V to -12.4V +12V Fixed 1A 1A 0.5% 2% 1% -11.6V to -12.4V +5V 4.75V to 5.50V 20A 30A 0.2% 1% 1% 5.1V to 5.2V +12V 11.5V to 12.5V 5A 10A 0.5% 2% 1% 11.9V to 12.1V MAP130-4002G -12V Fixed 1A 1A 0.5% 2% 1% -11.6V to -12.4V +12V Fixed 1A 1A 0.5% 2% 1% 11.6V to 12.4V +5V 4.75V to 5.50V 20A 30A 1% 1% 1% 5.1V to 5.2V +15V 14.0V to 16.0V 4A 8A 1% 2% 1% 15.0V to 15.1V MAP130-4003G -5V Fixed 1A 1A 2% 2% 1% -4.8V to -5.2V -15V Fixed 1A 1A 2% 2% 1% -14.7V to -15.3V +5V 4.75V to 5.50V 20A 30A 0.2% 1% 1% 5.1V to 5.25V +12V 11.5V to 12.8V 5A 10A 0.5% 2% 1% 11.75V to 12.0V MAP130-4010G -5V Fixed 1A 1A 0.5% 2% 1% -4.8V to -5.2V -12V Fixed 3A 3A 0.5% 2% 1% -11.6V to -12.4V 1 Peak load for 60 seconds or less are acceptable, 10% duty cycle, maximum. 2 Typical peak to peak noise expressed as a percentage of output voltage, 20 MHz bandwidth. 3 MAP130-1012 output currents are expressed as 12 V / 15 V operation. MAP130-1024 output currents are expressed as 24 V / 28 V operation. 4 Peak loads up to 165 Watts, (total of all outputs), for 60 seconds or less are acceptable, (10% duty cycle max.). 5 Maximum peak to peak noise expressed as a percentage of output voltage, 20 MHz bandwidth. 6 Non-G models use lead solder exemption Model numbers highlighted in yellow are not recommended for new designs. tech.support psbel.com