MAP55-4003G Bel Fuse

Bel Power Solutions MAP55 Series of power supplies provides reliable, tightly regulated DC power for industrial systems. MAP55 series complies with EMC product standard EN 61204-3. All units bear the CE Mark. The MAP55 utilizes a thermally efficient U-channel chassis design. Other mechanical design innovations include metric and SAE mounting inserts on each mounting surface to provide integration flexibility. Dual-mode connectors provide traditional terminal block connections or popular single row Molex connector mating. Single-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements. Wide Range Input for 110/220 VAC Applications Compact Footprint: 6.0 x 3.27 x 1.6 inch (152.4 x 83.1 x 40.6 mm) Greater than 225000 Hours MTBF Metric and SAE Mounting Inserts RoHS Compliant CE Marked to Low Voltage Directive Meets EMC standards: EN 61204-3 EN 55032 EN 61000-3-2 EN 61000-3-3 2 MAP55 Series MAX PEAK RIPPLE OUTPUT ADJUSTMENT LINE LOAD INITIAL SETTING 8 MODEL OUTPUT OUTPUT & VOLTAGE RANGE REGULATION REGULATION ACCURACY 1 2 CURRENT CURRENT NOISE MAP40-1005G 5V 4.7V to 5.5V 8A 11A 0.2% 1.5% 1% 5.0V to 5.2V 6 3 3 MAP55-1012G 12V/15V 11.4V to 15.75V 5.0/4.0A 5.8/4.7A 0.2% 1% 1% 12.0V to 12.2V 6 3 3 MAP55-1024G 24V/28V 23.5V to 28.5V 2.5/2.2A 2.9/2.5A 0.2% 1% 1% 23.8V to 24.2V PEAK RIPPLE OUTPUT ADJUSTMENT OUTPUT LINE LOAD INITIAL SETTING 8 MODEL OUTPUT & VOLTAGE RANGE CURRENT REGULATION REGULATION ACCURACY 4 2 CURRENT NOISE +5V 4.7V to 5.6V 6A 8A 0.2% 2% 1% 5.0V to 5.2V +12V Fixed 3A 5A 0.2% 2% 1% 11.6V to 12.4V 7 MAP55-4000G 5 -5V Fixed 0.5A 1A 0.5% 2% 1% -4.8V to -5.2V 5 -12V Fixed 0.5A 1A 0.5% 2% 1% -11.6V to -12.4V +5V 4.7V to 5.6V 6A 8A 0.2% 2% 1% 5.0V to 5.2V +24V Fixed 1.5A 2.5A 0.2% 2% 1% 23.0V to 24.9V 7 MAP55-4001G 5 -12V Fixed 0.5A 1A 0.5% 2% 1% -11.6V to -12.4V 5 +12V Fixed 0.5A 1A 0.5% 2% 1% 11.6V to 12.4V +5V 4.7V to 5.6V 6A 8A 0.2% 2% 1% 5.0V to 5.2V +12V Fixed 3A 5A 0.2% 2% 1% 11.6V to 12.4V 7 MAP55-4002G 5 -12V Fixed 0.5A 1A 0.5% 2% 1% -11.6V to -12.4V 5 +12V Fixed 0.5A 1A 0.5% 2% 1% 11.6V to 12.4V +5V 4.7V to 5.6V 6A 8A 0.2% 2% 1% 5.0V to 5.2V +15V Fixed 2.5A 3.5A 0.2% 2% 1% 14.6V to 15.4V 7 MAP55-4003G 5 -5V Fixed 0.5A 1A 0.5% 2% 1% -4.8V to -5.2V 5 -15V Fixed 0.5A 1A 0.5% 2% 1% -14.4V to -15.6V +5V 4.7V to 5.6V 6A 8A 0.2% 2% 1% 5.0V to 5.2V +24V Fixed 1.5A 2.5A 0.2% 2% 1% 23.0V to 24.9V 7 MAP55-4004G 5 -15V Fixed 0.5A 1A 0.5% 2% 1% -14.5V to -15.5V 5 +15V Fixed 0.5A 1A 0.5% 2% 1% 14.5V to 15.5V 1 Peak load for 60 seconds or less are acceptable, 10% duty cycle, maximum. 2 Maximum peak to peak noise expressed as a percentage of output voltage, 20 MHz bandwidth. 3 MAP55-1012G output currents are expressed as 12V/15V operation. MAP55-1024G output currents are expressed as 24V/28V operation. 4 Peak loads up to 65 watts for 60 seconds or less are acceptable, (10% duty cycle max.). Peak power must not exceed 65 watts. 5 Maximum load on V3 or V4 could be 1 amp continuous if output V4 or V3 is unloaded. 6 Maximum 60 W with 150LFM (Linear Feet per Minute) air cooling or maximum 50 W with convection cooling. 7 Maximum 55 W with 200LFM (Linear Feet per Minute) air cooling or maximum total output power 45 W at 40C ambient operating temperature for models with no cover and 40 W for models with cover / convection cooling. 8 Non-G models use lead solder exemption. tech.support psbel.com