MAP80-1012G Bel Fuse

Bel Power Solutions MAP80 Series provides reliable, tightly regulated DC power for industrial systems which require high peak current capabilities. MAP80 series complies with EMC product standard EN 61204-3. All units bear the CE Mark. The MAP80 utilizes a variable frequency design with a thermally efficient U-channel chassis. Design innovations include metric and SAE mounting inserts on each mounting surface to provide integration flexibility. Dual-mode connectors provide traditional terminal block connections or popular single-row Molex connector mating. Single-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements. RoHS Compliant Wide Range Input for 110/230 VAC Applications CE marked to Low Voltage Directive TTL Compatible Power Fail Signal Greater than 175,000 Hours MTBF Metric and SAE Mounting Inserts Safety approved to IEC/EN 62368-1 Meets EMC standards: EN 61204-3 EN 55032 EN 61000-3-2 EN 61000-3-3 2 MAP80 Series MAX PEAK RIPPLE OUTPUT ADJUSTMENT LINE LOAD INITIAL SETTING 7 MODEL OUTPUT OUTPUT & VOLTAGE RANGE REGULATION REGULATION ACCURACY 1 2 CURRENT CURRENT NOISE 6 3 3 MAP80-1012G 12V/15V 11.5V to 15.5V 7.5/6.0A 9.2/7.3A 0.2% 1% 1% 11.76V to 12.15V 6 3 3 MAP80-1024G 24V/28V 23.0V to 29.0V 3.8/3.2A 4.6/3.9A 0.1% 0.5% 0.5% 23.8V to 24.2V PEAK RIPPLE OUTPUT ADJUSTMENT OUTPUT LINE LOAD INITIAL SETTING 7 MODEL OUTPUT & VOLTAGE RANGE CURRENT REGULATION REGULATION ACCURACY 4 2 CURRENT NOISE +5V 4.8V to 5.5V 14A 16A 0.2% 1% 1% 5.1V to 5.2V +12V 11.52V to 12.48V 4A 7A 0.2% 1% 1% 11.9V to 12.1V 5 MAP80-4000G -5V Fixed 1A 1A 0.5% 2% 1% -4.8V to -5.4V -12V Fixed 1A 1A 0.5% 2% 1% -11.5V to -12.5V +5V 4.8V to 5.5V 14A 16A 0.2% 1% 1% 5.1V to 5.2V +24V 23.04V to 24.96V 2A 3.5A 0.2% 1% 1% 24.0V to 24.1V 5 MAP80-4001G -12V Fixed 1A 1A 0.5% 2% 1% -11.5V to -12.5V +12V Fixed 1A 1A 0.5% 2% 1% 11.5V to 12.5V +5V 4.7V to 5.5V 14A 16A 0.2% 1% 1% 5.1V to 5.2V +12V 11.52V to 12.48V 4A 7A 0.2% 1% 1% 12.0V to 12.1V 5 MAP80-4002G -12V Fixed 1A 1A 0.5% 2% 1% -11.6V to -12.4V +12V Fixed 1A 1A 0.5% 2% 1% 11.6V to 12.4V +5V 4.8V to 5.5V 14A 16A 0.2% 1% 1% 5.1V to 5.2V +15V 14.4V to 15.6V 3.5A 6A 0.2% 1% 1% 14.6V to 15.1V 5 MAP80-4003G -5V Fixed 1A 1A 0.5% 2% 1% -4.8V to -5.4V -15V Fixed 1A 1A 0.5% 2% 1% -14.4V to -15.5V +5V 4.8V to 5.5V 14A 16A 0.2% 1% 1% 5.1V to 5.2V +24V 23.04V to 24.96V 2A 3.5A 0.2% 1% 1% 24.0V to 24.1V 5 MAP80-4004G -15V Fixed 1A 1A 0.5% 2% 1% -14.4V to -15.5V +15V Fixed 1A 1A 0.5% 2% 1% 14.4V to 15.5V +5V 4.8V to 5.5V 14A 16A 0.2% 1% 1% 5.1V to 5.2V +12V 11.52V to 12.48V 4A 7A 0.2% 1% 1% 12.0V to 12.1V 5 MAP80-4010G -5V Fixed 1A 1A 0.5% 2% 1% -4.8V to -5.4V -12V Fixed 3A 3A 0.5% 2% 1% -11.5V to -12.5V 1 Peak load for 60 seconds or less are acceptable, 10% duty cycle, maximum. 2 Maximum peak to peak noise expressed as a percentage of output voltage, 20 MHz bandwidth. 3 MAP80-1012 output currents are expressed as 12V/15V operation. MAP80-1024 output currents are expressed as 24V/28V operation. 4 Peak loads up to 90 Watts for 60 seconds or less are acceptable, (10% duty cycle max.). Peak power must not exceed 90 Watts. 5 Output rated 65 W max for 50C ambient, convection cooled. 6 Output rated 75 W max for 50C ambient, convection cooled. 7 Non-G models use lead solder exemption and are not recommended for new designs. tech.support psbel.com