Bel Power Solutions MAP80 Series provides reliable, tightly regulated DC power for industrial systems which require high peak current capabilities. MAP80 series complies with EMC product standard EN 61204-3. All units bear the CE Mark. The MAP80 utilizes a variable frequency design with a thermally efficient U-channel chassis. Design innovations include metric and SAE mounting inserts on each mounting surface to provide integration flexibility. Dual-mode connectors provide traditional terminal block connections or popular single-row Molex connector mating. Single-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements. RoHS Compliant Wide Range Input for 110/230 VAC Applications CE marked to Low Voltage Directive TTL Compatible Power Fail Signal Greater than 175,000 Hours MTBF Metric and SAE Mounting Inserts Safety approved to IEC/EN 62368-1 Meets EMC standards: EN 61204-3 EN 55032 EN 61000-3-2 EN 61000-3-3 2 MAP80 Series MAX PEAK RIPPLE OUTPUT ADJUSTMENT LINE LOAD INITIAL SETTING 7 MODEL OUTPUT OUTPUT & VOLTAGE RANGE REGULATION REGULATION ACCURACY 1 2 CURRENT CURRENT NOISE 6 3 3 MAP80-1012G 12V/15V 11.5V to 15.5V 7.5/6.0A 9.2/7.3A 0.2% 1% 1% 11.76V to 12.15V 6 3 3 MAP80-1024G 24V/28V 23.0V to 29.0V 3.8/3.2A 4.6/3.9A 0.1% 0.5% 0.5% 23.8V to 24.2V PEAK RIPPLE OUTPUT ADJUSTMENT OUTPUT LINE LOAD INITIAL SETTING 7 MODEL OUTPUT & VOLTAGE RANGE CURRENT REGULATION REGULATION ACCURACY 4 2 CURRENT NOISE +5V 4.8V to 5.5V 14A 16A 0.2% 1% 1% 5.1V to 5.2V +12V 11.52V to 12.48V 4A 7A 0.2% 1% 1% 11.9V to 12.1V 5 MAP80-4000G -5V Fixed 1A 1A 0.5% 2% 1% -4.8V to -5.4V -12V Fixed 1A 1A 0.5% 2% 1% -11.5V to -12.5V +5V 4.8V to 5.5V 14A 16A 0.2% 1% 1% 5.1V to 5.2V +24V 23.04V to 24.96V 2A 3.5A 0.2% 1% 1% 24.0V to 24.1V 5 MAP80-4001G -12V Fixed 1A 1A 0.5% 2% 1% -11.5V to -12.5V +12V Fixed 1A 1A 0.5% 2% 1% 11.5V to 12.5V +5V 4.7V to 5.5V 14A 16A 0.2% 1% 1% 5.1V to 5.2V +12V 11.52V to 12.48V 4A 7A 0.2% 1% 1% 12.0V to 12.1V 5 MAP80-4002G -12V Fixed 1A 1A 0.5% 2% 1% -11.6V to -12.4V +12V Fixed 1A 1A 0.5% 2% 1% 11.6V to 12.4V +5V 4.8V to 5.5V 14A 16A 0.2% 1% 1% 5.1V to 5.2V +15V 14.4V to 15.6V 3.5A 6A 0.2% 1% 1% 14.6V to 15.1V 5 MAP80-4003G -5V Fixed 1A 1A 0.5% 2% 1% -4.8V to -5.4V -15V Fixed 1A 1A 0.5% 2% 1% -14.4V to -15.5V +5V 4.8V to 5.5V 14A 16A 0.2% 1% 1% 5.1V to 5.2V +24V 23.04V to 24.96V 2A 3.5A 0.2% 1% 1% 24.0V to 24.1V 5 MAP80-4004G -15V Fixed 1A 1A 0.5% 2% 1% -14.4V to -15.5V +15V Fixed 1A 1A 0.5% 2% 1% 14.4V to 15.5V +5V 4.8V to 5.5V 14A 16A 0.2% 1% 1% 5.1V to 5.2V +12V 11.52V to 12.48V 4A 7A 0.2% 1% 1% 12.0V to 12.1V 5 MAP80-4010G -5V Fixed 1A 1A 0.5% 2% 1% -4.8V to -5.4V -12V Fixed 3A 3A 0.5% 2% 1% -11.5V to -12.5V 1 Peak load for 60 seconds or less are acceptable, 10% duty cycle, maximum. 2 Maximum peak to peak noise expressed as a percentage of output voltage, 20 MHz bandwidth. 3 MAP80-1012 output currents are expressed as 12V/15V operation. MAP80-1024 output currents are expressed as 24V/28V operation. 4 Peak loads up to 90 Watts for 60 seconds or less are acceptable, (10% duty cycle max.). Peak power must not exceed 90 Watts. 5 Output rated 65 W max for 50C ambient, convection cooled. 6 Output rated 75 W max for 50C ambient, convection cooled. 7 Non-G models use lead solder exemption and are not recommended for new designs. tech.support psbel.com