The MBC225 Series of open-frame medical power supplies, with its wide universal 90-264 VAC input range, is available at 225 W of output power and a variety of single and multiple output voltages. The MBC series is designed and approved to the latest Medical standards (EN/IEC 60601-1), providing 2 x MOPP isolation for Class I & Class II applications. These power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications. 2 x 4 x 1 Inch Form Factor 225 W with Forced Air Cooling Approved to EN/IEC 60601-1 Efficiencies up to 94% -40 to 70 C Operating Temperature Dual Fusing 12 V Fan Output, Thermal Shut-Down Feature 3.37 Million Hours, Telcordia - SR332-Issue 3 MTBF Standby Power <0.5 W Medical (BF) Safety Approvals RoHS Compliant Diagnostic Dialysis Drug Pump Home Health Care Monitoring Portable Equipment 2 MBC225 Series MAX. LOAD MAX. LOAD MAX. LOAD RIPPLE & 1 MODEL NUMBER DESCRIPTION VOLTAGE (CONVECTION) (CONVECTION) MIN. LOAD 2 (13 CFM) NOISE (112.5 W) (120 W) MBC225-1T12L Screw Terminal 12 V 9.37 A 10.0 A 18.75 A 0.0 A 1% MBC225-1012L Molex Connector MBC225-1T15L Screw Terminal 15 V 7.5 A 8.0 A 15 A 0.0 A 1% MBC225-1015L Molex Connector MBC225-1T24L Screw Terminal 24 V 4.68 A 5.0 A 9.37 A 0.0 A 1% MBC225-1024L Molex Connector MBC225-1T30L Screw Terminal 30 V 3.75 A 4.0 A 7.5 A 0.0 A 1% MBC225-1030L Molex Connector MBC225-1T48L Screw Terminal 48 V 2.34 A 2.5 A 4.68 A 0.0 A 1% MBC225-1048L Molex Connector MBC225-1T58L Screw Terminal 58 V 1.94 A 2.07 A 3.88 A 0.0 A 1% MBC225-1058L Molex Connector 3 COVER-225-XBC metal cover kit accessory Specifications are for nominal input voltage, 25C unless otherwise stated. PARAMETER DESCRIPTION / CONDITION SPECIFICATION Universal 85-264 VAC / 390 VDC Input Voltage (Derate from 100% at 100 VAC to 90% at 85 VAC) Input Frequency 47-63 Hz 115 VAC: 2.2 A max. Input Current 230 VAC: 1.1 A max. No Load Power Typical < 0.5 W 115 VAC: 25 A Inrush Current 230 VAC: 45 A 264 VAC: 75 A Typical (N.A. For Class II Option) 300 uA Leakage Current Touch current: <100 uA Power Factor With Full Load >0.95 PFC: 70 to 130 kHz Switching Frequency PWM: 50-80 kHz 1 For Class II (without input Earth pin) add suffix -2 (e.g.: MBC225-1012L-2). Ensure non-metallic mounting stud when installing a Class II product. 2 Ripple is peak to peak with 20 MHz bandwidth and 10 F (Tantalum capacitor) in parallel with a 0.1 F capacitor at rated line voltage and load ranges. 3 When used in Cover Kit, de-rate output power to 70 % under all operating conditions. tech.support psbel.com