MPU150/MDU150 Series Data Sheet Features RoHS lead free solder and lead solder exempted products are available Power Factor Correction (PFC) meets EN61000-3-2 Low-profile height fits 1U constraints Dual main outputs provide 3.3V and 5V for mixed mode applications Single wire current sense on outputs V1 and V2 Remote sense on outputs V1 and V2 Overtemperature, overload, and overvoltage protection Available with metric or SAE mountings Greater than 340,000 Hours MTBF MDU150 models have 48VDC input Description The innovative MPU products incorporate Power Factor Correction (PFC) with a low-profile package designed to meet 1U height constraints. The MPU150-4530 and MPU150-4350 provide high current +3.3V and +5V on a single platform to support mixed-mode, high-speed digital circuitry. Power-Ones unique dual converter architecture combines high reliability with exceptional regulation. All multiple output models feature remote sense on outputs V1 and V2 to provide independent compensation of output cable losses. Other standard features include independent current sharing on V1 and V2, thermal shutdown, and remote inhibit. Airflow of 300 linear feet per minute (LFM) is required to deliver the full power density of 3.0 watts per cubic inch. The MDU150 Series provides the same benefits as the MPU150 Series, with nominal 48 volt DC input. AC Input, Single Output Model Selection - 180W WITH 300 LFM FORCED-AIR COOLING OUTPUT ADJUSTMENT MAXIMUM OUTPUT LINE LOAD RIPPLE & NOISE INITIAL SETTING MODEL VOLTAGE RANGE CURRENT (NOTE 1) REGULATION REGULATION %p-p (NOTE 2) ACCURACY MPU150-S259 12V 11.6V to 16V 15A (Note 3) 0.1% 1% 1% 11.97V to 12.03V MPU150-S262 24V 22.8V to 29.2V 7.5A (Note 3) 0.1% 1% 1% 23.95V to 24.05V MPU150-S261 48V 45V to 56V 3.75A (Note 3) 0.1% 1% 1% 47.9V to 48.1V Model numbers highlighted in yellow or shaded are not recommended for new designs. See MPU200 for new designs. AC Input, Multiple Output Model Selection - 150W WITH 300 LFM FORCED-AIR COOLING ISOLATED V3 AND V4 CAN BE USED AS POSITIVE OR NEGATIVE OUTPUTS OUTPUT ADJUSTMENT OUTPUT LINE LOAD RIPPLE & NOISE INITIAL SETTING MODEL VOLTAGE RANGE CURRENT (NOTE 1) REGULATION REGULATION %Pk-Pk (NOTE 2) ACCURACY +3.3V 3.15V to 3.80V 35A 0.6% 1.5% 1.5% 3.28V to 3.32V MPU150-3300 +5V 5.0V to 5.5V 20A 0.4% 3% 1% 4.98V to 5.02V +12V Fixed 2A 0.4% 3% 1% 11.76V to 12.24V +5V 5.0V to 5.5V 17.5A 0.4% 1% 1% 4.98V to 5.02V MPU150-3524 +12V 10.8V to 13.2V 4A 0.4% 3% 1% 11.94V to 12.06V +24V Fixed 2A 0.4% 3% 1% 23.52V to 24.48V +5V 5.0V to 5.5V 30A (Note 4) 0.4% 1% 1% 4.98V to 5.02V +12V 10.8V to 13.2V 8A 0.4% 1% 1% 11.94V to 12.06V MPU150-4000 12V 10.8V to 13.2V 3A 0.4% 1% 1% 11.94V to 12.06V 5V 5.0V to 5.5V 2A 0.4% 1% 1% 4.98V to 5.02V +2.5V 2.25V to 3.0V 30A (Note 4) 0.8% 2% 2% 2.49V to 2.51V +3.3V 3.15V to 3.8V 15A (Note 4) 0.6% 1.5% 1.5% 3.28V to 3.32V MPU150-4230 12V 10.8V to 13.2V 4A (Note 5) 0.4% 1% 1% 11.94V to 12.06V 5V 5.0V to 5.5V 2A (Note 5) 0.4% 1% 1% 4.98V to 5.0V +3.3V 3.15V to 3.80V 30A (Note 4) 0.6% 1.5% 1% 3.28V to 3.32V +5V 5.0V to 5.5V 15A (Note 4) 0.4% 1% 1% 5.00V to 5.04V MPU150-4350 12V 10.8V to 13.2V 3A (Note 5) 0.4% 7% 1% 11.94V to 12.06V 12V 10.8V to 13.2V 3A (Note 5) 0.4% 7% 1% 11.94V to 12.06V +5V 5.0V to 5.5V 30A (Note 4) 0.4% 1% 1% 4.98V to 5.02V +3.3V 3.15V to 3.60V 15A (Note 4) 0.6% 1.5% 1.5% 3.28V to 3.32V MPU150-4530 12V 10.8V to 13.2V 3A (Note 5) 0.4% 7% 1% 11.94V to 12.06V 12V 10.8V to 13.2V 3A (Note 5) 0.4% 7% 1% 11.94V to 12.06V NOTES: 1) The MPU/MDU150 products require a minimum of 300 LFM of forced-air cooling under 4) Total current between V1 and V2 is 30A, maximum rating. ALL load conditions. It is recommended that the airflow be applied from the input side of the 5) Total current between V3 and V4 is 5A, maximum rating. power supply blowing towards the output. 2) Maximum peak-to-peak noise expressed as a percentage of output voltage, 20 MHz bandwidth. 3) Total power of 180 Watts. MCD10009 Rev. 1.0, 15-Oct-07 Page 1 of 6 www.power-one.comMPU150/MDU150 Series Data Sheet DC Input Model Selection - 150W WITH 300 LFM FORCED-AIR COOLING ISOLATED V3 AND V4 CAN BE USED AS POSITIVE OR NEGATIVE OUTPUTS OUTPUT ADJUSTMENT OUTPUT LINE LOAD RIPPLE & NOISE INITIAL SETTING MODEL VOLTAGE RANGE CURRENT (NOTE 1) REGULATION REGULATION %Pk-Pk (NOTE 2) ACCURACY +3.3V 3.15V to 3.80V 35A 0.6% 1.5% 1.5% 3.28V to 3.32V MDU150-3300 +5V 5.0V to 5.5V 20A 0.4% 3% 1% 4.98V to 5.02V +12V N/A 2A 0.4% 3% 1% 11.76V to 12.24V +5V 5.0V to 5.5V 30A (Note 3) 0.4% 1% 1% 4.98V to 5.02V +12V 10.8V to 13.2V 8A 0.4% 1% 1% 11.94V to 12.06V MDU150-4000 12V 10.8V to 13.2V 3A 0.4% 1% 1% 11.94V to 12.06V 5V 5.0V to 5.5V 2A 0.4% 1% 1% 4.98V to 5.02V +2.5V 2.25V to 3.0V 30A (Note 3) 2% 2% 2% 2.49V to 2.51V +3.3V 3.15V to 3.8V 15A (Note 3) 1.5% 1.5% 1.5% 3.28V to 3.32V MDU150-4230 12V 10.8V to 13.2V 3A 1% 1% 1% 11.94V to 12.06V 5V 5.0V to 5.5 V 2A 1% 1% 1% 4.98V to 5.0V +3.3V 3.15V to 3.8V 30A (Note 5) 1.5% 1.5% 1% 3.28V to 3.32V +5V 5.0V to 5.5V 15A (Note 5) 1% 1% 1% 5.00V to 5.04V MDU150-4350 12V 10.8V to 13.2V 3A (Note 4) 7% 7% 1% 11.94V to 12.06V 12V 10.8V to 13.2V 3A (Note 4) 7% 7% 1% 11.94V to 12.06V +5V 5.0V to 5.5V 30A (Note 3) 0.4% 1% 1% 4.98V to 5.02V +3.3V 3.15V to 3.60V 15A (Note 3) 0.6% 1.5% 1.5% 3.28V to 3.32V MDU150-4530 12V 10.8V to 13.2V 3A (Note 4) 0.4% 7% 1% 11.94V to 12.06V 12V 10.8V to 13.2V 3A (Note 4) 0.4% 7% 1% 11.94V to 12.06V NOTES: 1) The MPU/MDU150 products require a minimum of 300 LFM of forced-air cooling 4) Total current between V3 and V4 is 5A, maximum rating. under ALL load conditions. It is recommended that the airflow be applied from the 5) Total current between V1 and V2 is 40A, maximum rating input side of the power supply blowing towards the output. 2) Maximum peak-to-peak noise expressed as a percentage of output voltage, 20 MHz bandwidth. 3) Total current between V1 and V2 is 30A, maximum rating. Ordering Information: OPTIONS SUFFIXES TO ADD TO PART NUMBER Metric Mounting Add M as a suffix to the model number to order chassis with M4 x 0.7 mounting inserts. Metric mounting inserts are standard for single-output models MPU150-S259, MPU150-S261, and MPU150-S262. RoHS lead solder exemption No RoHS suffix character required. RoHS compliant for all 6 substances Add G as the last character of the part number. MPU150 Input Specifications PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS Input Voltage - AC Continuous input range. 85 264 VAC Input Frequency AC input. 47 63 Hz Hold-up Time After last AC line peak at 150 watts. MPU150-4350 17.5 ms All other models 20 Input Current 85 VAC at full rated load. MPU150 3.0 ARMS Input Protection Non-user serviceable internally located AC input line fuse. Inrush Surge Current Internally limited by thermistor. Vin = 230 VAC, one cycle, 25C. 35 APK Power Factor Per EN61000-3-2. 0.95 W/VA Operating Frequency Switching frequency of main output transformer. 100 120 Switching frequency of secondary transformer. 65 90 kHz Switching frequency of Power Factor Correction circuit. 60 MCD10009 Rev. 1.0, 15-Oct-07 Page 2 of 6 www.power-one.com