The MPU200/MDU200 Series is based upon the proven architecture of the MPU150/MDU150 product line. The MPU products incorporate Power Factor Correction (PFC) with a low-profile package designed to meet 1U height constraints. In this series, 200 watts of continuous output power is provided with single or multiple output units suited for distributed power or central power applications. The series provides high current +3.3V and +5V on a single platform to support mixed-mode, high-speed digital circuitry. The Bel Power Solutions dual-converter architecture combines high reliability with exceptional regulation. All multiple-output models feature remote sense on outputs V1 and V2 to provide independent compensation of output cable losses. Other standard features include independent current sharing on V1 and V2 quad-model outputs, thermal shutdown, and remote inhibit. Airflow of 300 linear feet per minute (LFM) is required to deliver the full power density of greater than 4.0 watts per cubic inch. RoHS Compliant Power Factor Correction (PFC) Same size, airflow, and construction as MPU150/MDU150 with over 33% more power Single-wire current sense on quad model outputs V1 and V2 Remote sense on quad model outputs V1 and V2 Current share and N+1 redundancy (standard on all models) Overtemperature, overload, and overvoltage protection Available with SAE mountings MDU200 models have 48 VDC input Asia-Pacific Europe, Middle East North America +86 755 298 85888 +353 61 225 977 +1 866 513 2839 2015 Bel Power Solutions, Inc. BCD.00604 AA 2 1 200W/225 W PK with 300 LFM Forced-Air Cooling MAXIMUM PEAK RIPPLE & OUTPUT ADJUSTMENT LINE LOAD INITIAL SETTING 7 MODEL OUTPUT OUTPUT NOISE VOLTAGE RANGE REGULATION REGULATION ACCURACY 2 2 3 CURRENT CURRENT % pk-pk MPU200-1012G 12V 11.6V to 16V 17.0A 19.0A 0.1% 1% 1% 11.97V to 12.03V MPU200-1024G 24V 22.8V to 29.2V 8.35A 9.4A 0.1% 1% 1% 23.95V to 24.05V MPU200-1048G 48V 45V to 56V 4.2A 4.7A 0.1% 1% 1% 47.9V to 48.1V 1 200 W with 300 LFM Forced-Air Cooling - Isolated V3 and V4 can be used as positive or negative outputs MAXIMUM RIPPLE & OUTPUT ADJUSTMENT LINE LOAD INITIAL SETTING 7 MODEL OUTPUT NOISE VOLTAGE RANGE REGULATION REGULATION ACCURACY 2 3 CURRENT % pk-pk 4 +5V 5.0V to 5.5V 30A 0.4% 1% 1% 4.98V to 5.02V 4 +3.3V 3.15V to 3.60V 15A 0.6% 1.5% 1.5% 3.28V to 3.32V MPU200-4530G 5 12V 10.8V to 13.2V 8A 0.4% 10% 1% 11.94V to 12.06V 5 12V 10.8V to 13.2V 4A 0.4% 10% 1% 11.60V to 12.40V 1 200 W with 300 LFM Forced-Air Cooling MAXIMUM PEAK RIPPLE & OUTPUT ADJUSTMENT LINE LOAD INITIAL SETTING 7 MODEL OUTPUT OUTPUT NOISE VOLTAGE RANGE REGULATION REGULATION ACCURACY 2 2 3 CURRENT CURRENT % pk-pk MDU200-1012G 12V 11.6V to 16V 17.0A 19.0A 0.1% 1% 1% 11.97V to 12.03V 6 MDU200-1024G 24V 22.8V to 29.2V 8.35A 9.4A 0.1% 1% 1% 23.95V to 24.05V MDU200-1048G 48V 45V to 56V 4.2A 4.7A 0.1% 1% 1% 47.9V to 48.1V Isolation Diode Option - Offered on single-output models. Add D at the end of the part number if an isolation diode is needed. NOTES: 1 This product is not rated for convection applications. 2 The MPU/MDU200 products require a minimum of 300 LFM of forced-air cooling under ALL load conditions. It is recommended that the airflow be applied from the input side of the power supply blowing towards the output. 3 Maximum peak-to-peak noise expressed as a percentage of output voltage, 20 MHz bandwidth. 4 Total current for V1 and V2 is not to exceed 35A. 5 Total power on V3 and V4 is not to exceed 100W. 6 Derating is required on output voltages above 27VDC. Consult factory. 7 Non-G models use lead solder exemption and are not recommended for new designs. OPTIONS SUFFIXES TO ADD TO PART NUMBER Add M as a suffix to the model number to order chassis with M3 x 0.7 mounting inserts. Metric Mounting Consult factory for availability. Offered on single-output models. Add D to the part number suffix if an isolation diode is needed. Isolation Diode Consult factory for availability. RoHS lead solder exempt No RoHS suffix character required. RoHS compliant for all 6 substances Add G as the last character of the part number. tech.support psbel.com