PFC375-1024FM Bel Fuse

The PFC375 products of the PerFormanCe Power Series incorporate high performance midrange power, active Power Factor Correction (PFC), and high reliability to meet varied commercial and industrial requirements. Providing tightly-regulated DC power in a wide variety of single and multiple output configurations, the PFC375 is designed to provide full output power with only 300 Linear Feet per Minute (LFM) forced-air cooling (factory installed fan optional). Other features include remote sense, power fail, logic level inhibit, and DC power good. Main channel current sharing is provided for redundant applications. The PFC375 is available with SAE mountings or optional metric mountings. The PFC375 product line is approved to the latest international regulatory standards and displays the CE Mark. RoHS Compliant Greater than 1 million hours demonstrated MTBF Power Factor Correction (PFC) meets EN61000-3-2 Fully-regulated outputs Main output remote sense Current Share, Power Fail, and Power Good signals Overtemperature, overvoltage, and overcurrent protected Available with metric and SAE mountings Input transient & ESD compliance to EN61000-4-2/-3/-4/-5 Fan output voltage and optional fan Asia-Pacific Europe, Middle East North America +86 755 298 85888 +353 61 225 977 +1 866 513 2839 2015 Bel Power Solutions, Inc. BCD.00594_AB 2 OUTPUT ADJUSTMENT MAX. OUTPUT LINE LOAD RIPPLE & INITIAL SETTING MODEL 1 2 VOLTAGE RANGE CURRENT REGULATION REGULATION NOISE % p-p ACCURACY PFC375-1012G 12V 10.8V to 13.5V 30A 0.2% 0.8% 1% 11.94V to 12.06V PFC375-1015G 15V 12.0V to 17.0V 25A 0.2% 0.6% 1% 14.94V to 15.06V PFC375-1024G 24V 21.6V to 26.4V 15A 0.5% 0.8% 1% 23.88V to 24.12V PFC375-1028G 28V 25.2V to 30.8V 13.4A 0.5% 0.9% 0.9% 27.86V to 28.14V PFC375-1048FG 48V 46.0V to 56.0V 7.8A 0.5% 1.0% 1% 47.52V to 48.48V NOTES: 1 Output currents ratings are expressed with 300 LFM forced air. 2 Maximum peak-to-peak noise expressed as a percentage of output voltage, 20 MHz bandwidth. 3 Models without suffix G use the lead solder exemption Ooo Model numbers highlighted in yellow are not recommended for new designs or EOL. Isolated V3 and V4 Can Be Used as Positive Or Negative Output OUTPUT ADJUSTMENT OUTPUT PEAK OUTPUT LINE LOAD RIPPLE & INITIAL SETTING MODEL 1 3 2 VOLTAGE RANGE CURRENT CURRENT REGULATION REGULATION NOISE % p-p ACCURACY +5V 4.5V to 5.5V 3.5 - 40A 40A 0.4% 0.8% 1% 4.98V to 5.02V +12V 11.3V to 12.6V 10A 16A 0.9% 0.9% 1% 11.9V to 12.1V PFC375-4000G 12V 11.3V to 12.6V 6A 6A 0.9% 0.9% 1% 11.9V to 12.1V 5V Fixed 3A 3A 2% 2% 2.4% 4.9V to 5.1V +5V 4.5V to 5.5V 3.5 - 40A 40A 0.4% 0.8% 1% 4.98V to 5.02V +12V 11.3V to 12.6V 10A 16A 0.9% 0.9% 1% 11.9V to 12.1V 4 PFC375-4001G 12V 11.3V to 12.6V 6A 6A 0.9% 0.9% 1% 11.9V to 12.1V 12V 11.0V to 15.8V 3A 3A 0.9% 0.9% 1% 11.9V to 12.1V +5V 4.5V to 5.5V 3.5 - 40A 40A 0.4% 0.8% 1% 4.98V to 5.02V +12V 11.3V to 12.6V 10A 16A 0.9% 0.9% 1% 11.9V to 12.1V 5 PFC375-4002G 12V 11.3V to 12.6V 6A 6A 0.9% 0.9% 1% 11.9V to 12.1V 24V 22.0V to 28.0V 3A 3A 0.5% 0.8% 1% 23.8V to 24.2V +5V 4.5V to 5.5V 3.5 - 40A 40A 0.4% 0.8% 1% 4.98V to 5.02V +12V 11.3V to 12.6V 10A 16A 0.9% 0.9% 1% 11.9V to 12.1V PFC375-4004G 15V 14.2V to 15.8V 4A 4A 0.7% 0.7% 1% 14.9V to 15.1V 15V 14.2V to 15.8V 4A 4A 0.7% 0.7% 1% 14.9V to 15.1V +5V 4.5V to 5.5V 3.5 - 40A 40A 0.4% 0.8% 1% 4.98V to 5.02V +12V 11.3V to 12.6V 10A 16A 0.9% 0.9% 1% 11.9V to 12.1V 6 PFC375-4005G 24V 22.0V to 28.0V 3A 3A 0.5% 0.8% 1% 23.8V to 24.2V 24V 22.0V to 28.0V 3A 3A 0.5% 0.8% 1% 23.8V to 24.2V +24V 21.5V to 26.4V 1 - 10A 10A 0.5% 0.8% 1% 23.8V to 24.2V +5V 4.5V to 5.5V 10A 16A 0.4% 0.8% 1% 4.98V to 5.02V PFC375-4200G 12V 11.4V to 12.6V 4A 4A 0.5% 1% 1% 11.9V to 12.1V 12V 11.4V to 12.6V 4A 4A 0.5% 1% 1% 11.9V to 12.1V tech.support@psbel.com