The PFE1500 is a 1500 W AC to DC power-factor-corrected (PFC) power supply that converts standard AC or HVDC power into a main output of 12 VDC for powering intermediate bus architectures (IBA) in high performance and reliability servers, routers, and network switches. The PFE1500 Series meets international safety standards and displays the CE-Mark for the European Low Voltage Directive (LVD). High Efficiency, typ. 94% at half load (80+ Platinum Efficiency) Certification for PFE1500-12-054NA & PFE1500-12NAS412 available) Universal input voltage range: 90-264 VAC High voltage DC input: 180-350 VDC (Optional for 400 VDC) AC input with power factor correction Always-On standby output (model dependent): o Programmable 3.3 V / 5 V (16.5 W) o 12 V 3 A (36 W) Hot-plug capable Parallel operation with active digital current sharing Digital controls for improved performance 3 High density design: 35 W/in Small form factor: 54.5(W) x 40.0(H) x 321.5(L) mm I2C communication interface for control, programming and monitoring with Power Management Bus protocol and PSMI Protocol Over temperature, output over voltage and overcurrent protection 256 Bytes of EEPROM for user information 2 Status LEDs: OK and FAIL with fault signaling High Performance Servers Routers Switches 2 PFE1500 Series 3 Product Family Power Level Dash V1 Output Dash Width Airflow Input A: C14 Socket 1 N: Normal PFE Front-End 1500 W 12 V 54 mm AC: C16 Socket 2 R: Reverse AH: HVDC Socket 1 N Normal Airflow from Output connector to Input AC socket Ordering PN: PFE1500-12-054NA for C14 AC input connector, input range is 180 VDC ~ 350 VDC and 90 VAC ~ 264 VAC Ordering PN: PFE1500-12-054NAC for C16 AC input connector, input range is 180 VDC ~ 350 VDC and 90 VAC ~ 264 VAC Ordering PN: PFE1500-12-054NAH for both AC and HVDC (RF-203-D-1.0) input connector, input range is 180 ~ 400 VDC and 90 ~ 264 VAC 2 R Reverse Airflow from Input AC socket to Output connector Ordering PN: PFE1500-12-054RA for C14 AC input connector, input range is 180 VDC ~ 350 VDC and 90 VAC ~ 264 VAC Ordering PN: PFE1500-12-054RAC for C16 AC input connector, input range is 180 VDC ~ 350 VDC and 90 VAC ~ 264 VAC Ordering PN: PFE1500-12-054RAH for both AC and HVDC (RF-203-D-1.0) input connector, input range is 180 ~ 400 VDC and 90 ~ 264 VAC 3 For difference of the AC socket and mechanical outline refer to section 13. S412 6 Product Family Power Level Dash V1 Output Airflow Input VSB Output A: C14 Socket 4 N: Normal PFE Front-End 1500 W 12 V AC: C16 Socket 12VSB 5 R: Reverse AH: HVDC Socket 4 N Normal Airflow from Output connector to Input AC socket Ordering PN: PFE1500-12NAS412 for C14 AC input connector, input range is 180 VDC ~ 350 VDC and 90 VAC ~ 264 VAC Ordering PN: PFE1500-12NACS412 for C16 AC input connector, input range is 180 VDC ~ 350 VDC and 90 VAC ~ 264 VAC Ordering PN: PFE1500-12NAHS412 for both AC and HVDC (RF-203-D-1.0) input connector, input range is 180 VDC ~ 400 VDC and 90 VAC ~ 264 VAC 5 R Reverse Airflow from Input AC socket to Output connector Ordering PN: PFE1500-12RAS412 for C14 AC input connector, input range is 180 VDC ~ 350 VDC and 90 VAC ~ 264 VAC 6 For difference of the AC socket and mechanical outline refer to section 13. tech.support psbel.com