PFE3600-12-069RA is a 3600 Watt AC/DC power-factor-corrected (PFC) and DC-DC power supply that converts standard AC mains power or high voltage DC bus voltages into a main output of 12 VDC for powering intermediate bus architectures (IBA) in high performance and reliability servers, routers, and network switches. The PFE3600-12-069RA meets international safety standards and displays the CE-Mark for the European Low Voltage Directive (LVD). Key Features & Benefits Best-in-class, Platinum efficiency Wide input voltage range: 90 300 VAC AC input with power factor correction DC input voltage range: 192 400 VDC Hot-plug capable Parallel operation with active current sharing thru analog bus Full digital controls for improved performance 3 High density design: 37 W/in Small form factor: 555 x 69 x 42 mm (21.85 x 2.72 x 1.65 in) I2C communication interface with Power Management Bus communication protocol for monitoring, control, and firmware update via bootloader Overtemperature, output overvoltage and overcurrent protection RoHS Compliant 2 Status LEDs: AC OK and DC OK with fault signaling US Patent Pending Applications High Performance Servers Routers Switches 2 PFE3600-12-069RA PFE 3600 - 12 - 069 R A Option Code Blank: Standard model Product Family Power Level Dash V1 Output Dash Width Airflow Input K: Screw for Key-in feature is 1 PFE Front-Ends 3600 W 12 V 69 mm R: Reversed A: AC installed. 1 Front to Rear The PFE3600-12-069RA is a fully DSP controlled, highly efficient front-end power supply. It incorporates resonant-soft-switching technology and interleaved power trains to reduce component stresses, providing increased system reliability and very high efficiency. With a wide input operating voltage range and minimal linear derating of output power with respect to ambient temperature, the PFE3600-12-069RA maximizes power availability in demanding server, switch, and router applications. The power supply is fan cooled and ideally suited for server integration with a matching airflow path. The PFC stage is digitally controlled using a state-of-the-art digital signal processing algorithm to guarantee best efficiency and unity power factor over a wide operating range. The DC-DC stage uses soft switching resonant techniques in conjunction with synchronous rectification. An active OR-ing device on the output ensures no reverse load current and renders the supply ideally suited for operation in redundant power systems. The always-on +12V standby output provides power to external power distribution and management controllers. Its protection with an active OR-ing device provides for maximum reliability. Status information is provided with front-panel LEDs. In addition, the power supply can be monitored and controlled (i.e. fan speed 2 setpoint) via I C communication interface with Power Management Bus protocol. It allows full monitoring of the supply, including 2 input and output voltage, current, power, and inside temperatures. The same I C bus supports the bootloader to allow field update of the firmware in the DSP controllers. Cooling is managed by a fan, controlled by the DSP controller. The fan speed is adjusted automatically depending on the actual 2 power demand and supply temperature and can be overridden through the I C bus. L V1 DC Vsb +12V Filter PFC SB DC N GND PE Aux EEPROM Converter FAN V1Sense+ V1Sense- Digital Digital Prim Sec I2C Communication Bus Controls Controls Logic Signals Figure 1. PFE3600-12-0069RA Block Diagram tech.support psbel.com PWM PWM