SPSPFE3-HVDC power shelf solutions provide rectification, system management, and power distribution, while maintaining high reliability and offering flexibility for future expansion. The power shelf can be configured with up to six hot-swap capable PFE3000-12-069RA AC/DC-DC power supplies that convert High Voltage DC Bus power into a main output of 12 VDC for powering intermediate bus architectures (IBA) in high performance and reliability servers, routers, and network switches. The shelf is compatible with the Open Compute Rack Design. The shelf has an optional slot for Network Attached Controller for providing control functions and monitoring through a 10/100 MB base Ethernet port and can be connected directly to the data center management network. Two separate DC inputs, one DC inlet powers 3 power modules. Modules are hot-swap capable. Modules support I2C communication interface for control, programming and monitoring with Power Management Bus protocol. Modules implement the following protections: Overtemperature, output overvoltage and output overcurrent. RoHS Compliant. Available for OCP V2 bus-bar style connection. High Performance Servers Routers Switches HVDC-DC POWER SHELVES 2 SPSPFE3-07, SPSPFE3-12, SPSPFE3-13 1. GENERAL BEL POWER SHELF REFERENCE TABLE INPUT AC ( Y ) AC ( Y ) AC ( ) AC (1-Phase) - 48 VDC +380 VDC 277/480 VAC 240/415 VAC 208 VAC 3x 230 VAC Triple Busbar Straight SPSPFE3-05G SPSPFE3-15* SPSPFE3-09 - SPSPFF3-03* SPSPFE3-13* +12 VDC Single Busbar Straight SPSPFE3-06G SPSPFE3-16* SPSPFE3-10 SPSTET4-02 SPSPFF3-02* SPSPFE3-12* 1 Single Busbar Offset SPSPFE3-08 SPSPFE3-14* SPSPFE3-11 - SPSPFF3-01 SPSPFE3-07 2 Single Busbar Offset Short SPSTET4-01 SPSTET4-11 SPSTET4-03* - N/A SPSTET4-04* 1 Single Busbar Offset Long SPSTET4-07 SPSTET4-12 - - N/A - +48 VDC Single Busbar Straight Long SPSTET4-09 SPSTET4-13 - - N/A - Triple Busbar Straight Long SPSTET4-08 SPSTET4-14 SPSTET4-17* - N/A - +380 VDC Connector Type SPSTET4-05* - SPSTET4-06* - - N/A * Available on request requiring short design cycle. 1 Mates with V2 2 Mates with V2 shallow rack NOTE: Other datasheets contain alternative shelf configurations, check factory for availability. 2. ORDERING INFORMATION MODEL INPUT AND OUTPUT CONFIGURATION Two 240 to 380 VDC inputs (nominal 380 VDC) SPSPFE3-07 1 set of output blade for +12 VDC output, Offset Bus bar Two 240 to 380 VDC inputs (nominal 380 VDC) SPSPFE3-07C 1 set of output blade for +12 VDC output, Offset Bus bar Network Attached Controller included Two 240 to 380 VDC inputs (nominal 380 VDC) SPSPFE3-12 1 set of output blade for +12 VDC output, Straight Bus bar Two 240 to 380 VDC inputs (nominal 380 VDC) SPSPFE3-12C 1 set of output blade for +12 VDC output, Straight Bus bar Network Attached Controller included Two 240 to 380 VDC inputs (nominal 380 VDC) SPSPFE3-13 3 sets of output blades for +12 VDC output (each set of blades has max.585 A) Two 240 to 380 VDC inputs (nominal 380 VDC) SPSPFE3-13C 3 sets of output blades for +12 VDC output (each set of blades has max.585 A) Network Attached Controller included tech.support psbel.com OUTPUT