BB02B BitScope Blade Duo Specification Specification Note Value Compatible Raspberry Pi 1 Raspberry Pi 3, 2, B+, A+ Supports Raspberry Pi Display 2 Yes Raspberry Pi per Unit 2 USB + Network Ports per Unit 3 8 + 2 or 2 + 0 HAT Devices per Unit - HUB Cards per Unit 2 CAP Devices per Unit 4 4 Camera Connector Slot 5 Yes x 2 HDMI & sound outputs 6 Yes x 1 Primary Power 7 5V via J8 Auxilliary Power 8 2 x 5V USB Power Ports 9 - Indicator LEDs 10 Reset / Interrupt Device power-down control 11 Yes Processor reset/interrupt 12 Yes SPI, I2C, Serial & GPIO 13 Yes Raspberry Pi Mounts M2.5 Blade Mounts M3 Blade power tabs 14 Yes Wall mounting stand-offs 15 Yes 19 Rack Compatible 16 5RU Power Budget 17 4A (peak) 3A (continuous) UPS Compatible 18 Yes DC 2.1mm, PoE Compatible 19 Yes Power Requirement 9V (4A) ~ 48 V (500mA) Operating Temperature 0 C to 70 C Storage Requirements -40 C ~ +40 C, 5 % ~ 95 % RH Dimensions (W x D x H) 73 x 160 x 21 mm Weight 79 g bitscope.com / product / BB02 GE09C 13 EL04C 05 BBB02B BitScope Blade Duo Notes 1 Any Raspberry Pi that conforms to the HAT specification is compatible. 2 Provides power and optional wall mounting capability. 3 Refers to the number of USB and Network ports (provided by connected Raspberry Pi) 4 Number of BitScope CAP (USB connected) per Blade (depending on power requirements) 5 Camera slots to enable the connection of visible or IR cameras. 6 HDMI and Audio ports on the Raspberry Pi in Slot 1 are accessible for connection. 7 Primary power for connected Raspberry Pi and HAT devices. 8 Auxilliary power for devices connected via 3-pin power headers (e.g. Raspberry Pi Display) 9 Additional USB (power only) ports for connected peripherals (e.g. Raspberry Pi Display) 10 LEDs to indicate BAY reset and interrupt inputs. 11 Each slot may be individually powered up/down via this header (normally powered up). 12 The device in each slot may be individually reset or interrupted via this header. 13 Access to each Raspberry Pi GPIO, SPI, I2C and Serial signals. 14 The blade may be powered via the mounting tabs, eliminates power wiring when rack mounted. 15 Blades supplied with wall mounting stand-offs with adhesive feet. 16 Blades can be rack mounted to create cluster computing solutions with optional metalwork. 17 Peak and continous current available at 5V across all slots and connected peripheral devices. 18 Blocking diode enables use with UPS and battery backup power solutions. 19 DC 2.1mm power socket compatible with low cost passive PoE solutions.